[PPRAANet] ellicott remote base

[Dan Huber]

One other option rather than a replacement computer is to look into is getting an external USB sound card.   They run between $20 and $30 dollars.

We determined it was the computer causing the noise on Tx by using my laptop with the same server software installed and the radio with the same CAT and audio plug in worked fine.

Dan, KN0MAP

> On Jan 21, 2017, at 5:24 PM, Jim <je_madsen at comcast.net> wrote:
> 
> We spent some time out in Ellicott today, and determined that the remote-base transmitting problems are being caused by the PC.
> 
> Until the PC is replaced and the remote server is installed and configured on the replacement PC, please only use the receiver function on the remote.
> We have been unable to disable the transmit function, so we physically reduced the transmitter power to minimum.
> 
> Thanks to Dan, KN0MAP for his help, without which we could not determine the cause.
> 
> 73
> Jim/K3ILC
> ______________________________________________________________
> PPRAANet mailing list
> Home: http://mailman.qth.net/mailman/listinfo/ppraanet
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:PPRAANet at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html