[PCR-1000] Using the PCR-1000 for Satellite

[Roger Kolakowski]

I believe I used WFM and I thought there was a next wider option above 50
KHZ that I used...I had great success...

For some reason 70 kHz sticks in my mind...Oh by the way...an inexpensive
preamp helps greatly...check Ramsay or the other kit guys...even a TV preamp
will help...

Roger
WA1KAT

----- Original Message ----- 
From: "Mike Curtis" <mcurtis at nc.rr.com>
To: "'Discussion of PCR-1000 by Icom'" <pcr-1000 at mailman.qth.net>
Sent: Wednesday, May 02, 2007 8:12 PM
Subject: [PCR-1000] Using the PCR-1000 for Satellite


> I am glad to see the list getting some activity.
> I have a question for the group.
> Is anyone out there using the PCR for Satellite reception?
> I have just built a quadrifilar helix antenna, and I have been playing
> around with receiving some of the pictures coming down from the NOAA
birds.
> I am getting pictures, but the quality is poor.
> Is anyone out there using the PCR-1000, and if you are do you have any
tips
> for doing it.
> I have been using wxtrack to track the NOAA satellites, and recording
using
> TalkPCR to a .wav file.  Then I am importing the wav file into wxtoimg.
> Wxtoimg maskes a picture out of the recording and can understand the pass
> signature in the file fine, but as I said the quality is pretty poor.  I
> have the receiver set to NBFM and 50kHz filter, and I have tried recording
> from both the speaker output and the packet output.  From everything I
have
> read this should be the correct settings.
> If anyone out there is using their PCR-1000 for Satellite reception I
would
> love to hear from you.
> Thanks!
>
> http://www.wxtoimg.com/
> http://www.david-taylor.pwp.blueyonder.co.uk/software/wxtrack.htm
>
>
>
> ______________________________________________________________
> PCR-1000 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/pcr-1000
> Help: http://mailman.qth.net/faq.htm
> Post: mailto:PCR-1000 at mailman.qth.net
>