[PCR-1000] Re: Can't get ICOM Software to work

[R. J. Grasser]

You also dont want to use a "null" modem cable.

I use the rcvr one of my USB 2.0 ports after its been converted from
standard RS-232.  Works great !!

Regards, RJ
----- Original Message -----
From: "Ubbe" <urban at home.se>
To: <pcr-1000 at mailman.qth.net>
Sent: Saturday, June 04, 2005 8:59 AM
Subject: [PCR-1000] Re: Can't get ICOM Software to work


I belive both your problems are related to the serial
cable you are using.

The Icom software need hardware handshake and uses
CTS/RTS and whatever to achive that. Your cable probably
is a 3-pin cable with only TX and RX data and ground
that lacks handshake signals.

The pcr1000 needs a "keep alive" pin (DTR?) to be
active to not switch itself off. That signal are
probably also missing from your serial cable.

Do not use adaptors and strange (Mac?) cables. Buy a
standard $2.99 full 9-pin serial extension cable at
nearest computer shop.

Ubbe.

-----Original Message-----
From: "Dave Hancock" <dave at davehancock.org>
>
>1. I can't get the ICOM software to recognise the pcr1000.
>
>1. after anything from 15 seconds to 2 minutes there is
> a loud 'clunk' from the speaker and the unit stops working.


______________________________________________________________
PCR-1000 mailing list
Home: http://mailman.qth.net/mailman/listinfo/pcr-1000
Help: http://mailman.qth.net/faq.htm
Post: mailto:PCR-1000 at mailman.qth.net