[PCR-1000] Re:Nonstandard Filter Modes

Tue, 9 Mar 2004 08:17:16 -0500

That would make the skirts steeper, but it could still leave a fairly flat mountain top at the summit.   It's an idea though...

Martin

-----Original Message-----
From:	Biastee [SMTP:[email protected]]
Sent:	Monday, March 08, 2004 11:27 PM
To:	[email protected]
Subject:	[PCR-1000] Re:Nonstandard Filter Modes

If the filter's insertion loss is not an issue,
narrower BW can be obtained by cascading multiple
sections of std. BW. BWcomposite = inv (sqrt (inv
(BW1^2)) + (inv (BW2^2))).

> --__--__--
> From: Martin Francis <[email protected]>
Sadly, the
> problem here is one of bandwidth.  The narrowest
filter shown there claims
> to be 2KHz, but in fact 
> this is the exact same filter fitted in the Icom's
> 2.8KHz position.
> 
> If you happen to find any ceramic / mechanical or
> crystal filter offering a 
> narrow bandwidth (say 1KHz or less) I'd be very
> interested in fitting one. (snipped)

__________________________________
Do you Yahoo!?
Yahoo! Search - Find what you're looking for faster
http://search.yahoo.com
______________________________________________________________
PCR-1000 mailing list
Home: http://mailman.qth.net/mailman/listinfo/pcr-1000
Help: http://mailman.qth.net/faq.htm
Post: mailto:[email protected]