[PCR-1000] packet output

Thu, 30 Jan 2003 17:53:01 -0700

After reading this :
http://www.theaustralian.news.com.au/common/story_page/0,5744,5907075%255E1702,00.html
I think I need to move more :-)

Then again I would have to go shopping for parts...

John

[email protected] wrote:

>Brian,
>I had the same result with ACARS as you.
>And I'm seeing the same thing you are with speech.
>But my sat signals are alot better.
>
>John,
>I'm thinking on trying to build a box that I can computer control to switch
>the speaker output and the packet output depending on what the radio is
>tuned to.
>I currently use SatTune to tune the radio. It shouldn't be to hard to modify
>it to control an unused signal on either the com port or a usb port to
>handle control of the box.
>This way, when it's tuned to a sat, The box will be routing the packet
>output to the line-in port. When you decoding anything else, Or listening to
>something like air traffic, The box will route the speaker output to the
>line-in.
>
>How would that be for hands off operation?  ;)
>
>hmmmm  yet another weekend project.    :)
>
>
>Chuck Simons..
>Simons Consulting
>www.simons.net
>
>90% of being smart is knowing what you're dumb at.
>
>
>-----Original Message-----
>From: [email protected]
>[mailto:[email protected]]On Behalf Of John Lang
>Sent: Thursday, January 30, 2003 6:11 PM
>To: [email protected]
>Subject: Re: [PCR-1000] packet output
>
>
>Speech sounds very err clipped? Bad enough that I get off my butt and
>switch back when scanning.
>
>John
>
>_________________________________________________________________
>PCR-1000 Mailing List
>Post Address: [email protected]
>Subscribe / Unsubscribe: 
>http://mailman.qth.net/mailman/listinfo/pcr-1000
>Mailman FAQ and Users Guide
>http://mailman.qth.net/faq.htm
>  
>

-- 
John Lang, 
E-mail: [email protected] 

BrightNoise Inc.,
16111 East Carmel Drive,
Fountain Hills, AZ 85268
Tel: (480) 837-5483, Fax: (480) 837-5189