[PCR-1000] TrunkPcr1k - COM14 issue

Thu, 3 Apr 2003 16:36:16 -0500

You are using the packet (discriminator) output and not the regular audio
output correct?

Reversing the polarity is all it took for me.

-Matt

-----Original Message-----
From: CrazyC [mailto:[email protected]] 
Sent: Thursday, April 03, 2003 4:26 PM
To: [email protected]
Subject: Re: [PCR-1000] TrunkPcr1k - COM14 issue

HI Mark,
I don't currently support the 400Mhz trunking systems...
When I find some info on it, I'll include it...

Thanks for the update,
Jay

> Jay said....
> > Does it work on the other COM ports?
>
> I've now moved the PCR1000 to COM1 and can now control the radio Ok 
> but
not
> having any luck with trunking.  The system I'm trying to track (RAF
> Lakenheath) is a 406/411/412MHz Motorola type 2 system.  My UBC780XLT
tracks
> it no problem so I know that signal strength is good enough for clear 
> decoding.
>
> What I've done so far....
>
> - Added channels for each of the channels that I have in that bank on 
> the 780XLT, all as NFM, 6kHz.
> - Press trunk and try each channel.
> - I get 40 to 50% 1s on several channels including the control channel
(that
> the 780XLT sits on when no talk group is active) but 0% recovery.
>
> I think I've tried every combination of reverse polarity and type.
>
> Any ideas please?
>
> Thanks,
>
> Mark.

_________________________________________________________________
PCR-1000 Mailing List
Post Address: [email protected]
Subscribe / Unsubscribe: 
http://mailman.qth.net/mailman/listinfo/pcr-1000
Mailman FAQ and Users Guide
http://mailman.qth.net/faq.htm