[PCR-1000] PCR1000 Windows XP

Sun, 16 Jun 2002 14:21:04 -0700

Thanks for the info.  After talking to Jim, I think I will spend the
money to get the software.  I like the idea of being able to pick up the
phone and talk to the man in charge.  Not so elsewhere, as you know.  I
will certainly go the route of redundancy setting up my backup methods. 

-Scott

-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Harry Flaxman
Sent: Sunday, June 16, 2002 12:30 PM
To: [email protected]
Subject: Re: [PCR-1000] PCR1000 Windows XP

Scancat does support the DSP more fully than Icom's software itself.  In
order to do noise blanking I believe you have to change a value in the
.ini
file in Icom's software.  All of the controls for the DSP in scancat are
on
the advanced scanning screen.  There is a button for DSP control, which
controls noise reduction, notch filter and IF spread.  There is also a
button on the right side of the advanced scanning screen that controls
noise
blanking.  It's fairly straight forward. I first tune the signal with
hte
dial, and then adjust the DSP once I know i have something.  This is the
only logical way to tune, for me that is.

I am using SavePCR, has a much friendlier interface and can be easliy
transferred to diskette and works under windows as well.  I know, I
know,
what if you want a DOS program to back up the eprom, that's where the
other
program comes in handy, and I use both, just to make sure.

It's a decent program, but there are no fancy things such as SSTV or
RTTY
decoding in it.  I use extra decoding programs for morse and SSTV and
RTTY
and weather stuff.  They work fairly well with Scancat SE.  As long as
you
get the SE version which supports recording of the signal through your
sound
card line in, you're all set for the decoders as msot of them use wav
files
to decode the info.

Harry

On 16-Jun-2002,  wrote:

> I am looking closely at scan cat right now, and I guess the one thing
I
> do not know about is the DSP functionality.  I would like to hear how
> that works, with and without DSP.  I downloaded the demo and played
with
> it, and as I said, I like the non-exotic feel, along with ScanStar.
My
> second PC I loaded XP pro on, and, sure as the sun rises gave it a
> couple days and went back to W2K pro.  Can't seem to shake the
unknown.
> I found humour when Jim replied to me that the W2K users are to
Windows
> what the Mac people are to their computers.
>
> I am hoping that my quest to find the ultimate software that I really
> like is coming to a close, being wiser and less wealthy for it all: I
> would do it all over again in a heartbeat.
>
> I have downloaded the following backup programs from the internet.
Any
> comment ?
>
> 1. savepcr1000
> 2. pcr1000 bur 1v2+
>
> As always, thanks !
>
> -Scott

_________________________________________________________________
PCR-1000 Mailing List
Post Address: [email protected]
Subscribe / Unsubscribe: 
http://mailman.qth.net/mailman/listinfo/pcr-1000