[PCR-1000] TalkPCR Signal Strength

[Ted Gurley]

Saw Pete's note below about Talk PCR 2.8 Beta5. Where is this available for 
registered users?

TG


At 11:36 PM 04/02/02 +0100, you wrote:
>Don,
>
>A few users have played with this feature.  Although I don't know if they
>succeeded in creating a new custom calibration table.
>
>I have individually calibrated 20+ radios for one customer, in fact the cal
>table in TalkPCR are an average of these 20 radios.
>
>If you want to create your own cal tables you need a calibrated sig gen, and
>be running the latest beta 2.8B5, which will allows reporting the real time
>raw RSSI reading in the S meter.
>
>Reports by users indicate that the standard calibration work quite well,
>often better than +-5dB.  The dB range of the CaldBm system far exceeds the
>standard ICOM S meter.
>
>Regards,
>
>Pete,
>
>
>
>
>----- Original Message -----
>From: "Don Grant" <dig@shaw.ca>
>To: <pcr-1000@mailman.qth.net>
>Sent: Monday, April 01, 2002 8:02 PM
>Subject: [PCR-1000] TalkPCR Signal Strength
>
>
> > Hope this isn't an old question.
> > Has anyone calibrated their radio with a signal generator to verify the
>accuracy of the various signal strength measurement schemes available with
>TalkPCR?  The program supplies a corrected lookup table for the CaldBm meter
>setting but questions in the helpfile if this is applicable to all serial
>numbers.  My interest is in the 150-160Mhz marine band range.  Any research
>results greatly appreciated.
> >
> > 73 de VE7BUM
> > Don
> >
> >
> > --- StripMime Report -- processed MIME parts ---
> > multipart/alternative
> >   text/plain (text body -- kept)
> >   text/html
> > ---
> > _______________________________________________
> > PCR-1000 mailing list
> > PCR-1000@mailman.qth.net
> > http://mailman.qth.net/mailman/listinfo/pcr-1000
>
>_______________________________________________
>PCR-1000 mailing list
>PCR-1000@mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/pcr-1000