[PaQSO] Another N1MM question

[Hank Greeb]

Edit the cabrillo file to whatever the specs on the cabrillo file sez it 
should be for RTTY and PSK.  According the the link from arrl.org, there 
ain't no ID for PSK, but all the "non CW" digital modes, including RTTY, 
Feld Hell, PSK-31, et nausea, are specified as "RY."

For eggzamble, KX9X of ARRL HQ says, in his article @
http://www.arrl.org/files/file/Contest%20-%20General/Tutorials/Submitting%20An%20Electronic%20Contest%20Log.pdf
If that gets truncated in transmission, try this itty bitty url
http://goo.gl/icf4s5
Sean says there ain't no specific ID for RTTY or other (Non CW) digital 
modes.  "RY" is the ID for numerous kinds of "Non CW" digital modes.

So, following the advice of the grate gods on high @ ARRL, it would seem 
that you'd change the mode on the Cabrillo file from PH to RY

Hope this helps

Seems like your computer is being driven by whatever is on your rig, so 
when running PSK-31 or RTTY you have it the the Silly Sideband Mode, so 
it tells the computer that you're running SSB instead of a "non CW 
digital mode."   If you'd tell your computer to follow the band plan, 
rather than follow the rig, it "probably" would have changed to "RY" 
instead of USB or LSB. But, whenever I've tried that, there are always 
exceptions - like I find a CW station where RTTY is specified in some 
band plan, or RTTY or another (non CW) digital mode is found where CW is 
specified.

Hope this helps.

72/73 de n8xx Hg
QRP >99.44% of the time

On 10/14/2013 8:14 PM, rnygren at epix.net wrote:
> Couldn't find the answer in the documentation, and perhaps others can benefit by my asking this here.
>
> I worked one station on RTTY and two on PSK.  (Op mode for RTTY was LSB and PSK was USB). Unable to change the mode to either RTTY or PSK. Editing the point value to 2 points works OK. I logged the QSO's as W3ZGD/RTTY  (as an example.)
>
> Was there any discussion that I missed? How best to log?
>
> Thanks!
>
> Rob N3RN (KA3EEO SUS)