[PaQSO] software

[John, K3CT]

Logging stations with /COUNTY or /R is not recommended for users of N1MM 
Logger software.


Stations logged with /M will be logged as a valid contact and points will be 
assigned for the contact. So all bonus, mobile, rover, portable, and county 
line stations need to be logged with  /M.

If you log contacts that are identical CALLSIGN/M but in different counties, 
you will receive point credit. If you log CALLSIGN/M in a previous logged 
county, it is logged with zero points.


By typing any station callsign, the software displays all contacts with that 
station so you can tell if you worked the station prior in that county.

John, K3CT






----- Original Message ----- 
From: "Michael Coslo" <mjc5 at psu.edu>
To: "PA QSO Party" <paqso at mailman.qth.net>
Sent: Wednesday, September 10, 2008 8:40 AM
Subject: Re: [PaQSO] software


>
> On Sep 9, 2008, at 12:22 PM, wa2fgk at ezlinx.net wrote:
>
>> Last year I used N3FJP's program for the QSO Party. I had a real  problem
>> when I either found a mobile station or a county line station. There  was
>> no way of knowing where I had worked them previously.
>
> When dealing with stations that are likely to be in different counties  at 
> different times, such as mobiles, rovers, or Special Event stations  at 
> times, the way to enter the QSO would be:
>
> assuming My call was the special event
>
> N3LI/CEN
> N3LI/HUN
> N3LI/CLE
>
> As long as the county is appended to the  callsign, all the software I 
> know of will handle it.
>
> This will even handle combination stations such as a mobile + special 
> event.
>
> GIve it a try before the next party with a bogus log to check if it  works 
> for you.
>
> Hope this helps.
>
> -73 de Mike N3LI -
>
>
> _______________________________________________
> PaQSO mailing list
> PaQSO at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/paqso