[OKDXA] FT8 F/H question

[Marcus Sutliff]

Adding a frequency to WSJT?
Thats easy.
File | Settings |Frequencies tab

Right-click anywhere inside the Working Frequencies table.
Click Insert and fill-in the fields.


With the ICOM rig and CAT over USB, on the Radio tab choose Split Operation
'Rig' and then when it transmits it will shift-up or shift-down to get the
freq more centered in your audio passband.  I use Mode 'None' as otherwise
the Radio jumps to RTTY mode.. so I set it SSB-D by hand.  But I'm using
OmniRig as the software interface.



This brings me to another favorite topic.. if you have a rig with a USB
interface like an IC-9100 or many others, they do audio over USB so you
don't need an external interface...


Sincerely,
Marcus Sutliff/N5ZY
Edmond Amateur Radio Society President
License Class Coordinator.
ARRL Volunteer Examiner
http://www.k5eok.org
http://www.qrz.com/db/N5ZY
https://www.youtube.com/user/95PistolPete


On Sat, Feb 29, 2020 at 10:30 AM <GARYLM at kiamichiwb.org> wrote:

>
> THE ONLY WAY I HAVE FOUND TO CHANGE FREQ IS GOING TO WSJT-X LOG AND CHANGE
> IT THERE,  60M IS NOT IN THE PROGRAM EITHER SO HAVE TO GO TO WSJT=X LOG AND
> CHANGE IT MANUALLY AND HIT SAVE.  GOOD LUCK, I WOULD LIKE TO KNOW TOO IF
> THERE IS A BETTER WAY, AND TO ADD FREQ TO PROGRAM.
>
> 73
> GARY - WQ5R
>
> --- tmwebb at cox.net wrote:
>
> From: "Thomas Webb" <tmwebb at cox.net>
> To: "'Oklahoma DX Association'" <okdxa at mailman.qth.net>
> Subject: Re: [OKDXA] FT8 F/H question
> Date: Fri, 28 Feb 2020 14:27:57 -0600
>
> I'm not sure about that.  I usually just turn the dial.
>
> -----Original Message-----
> From: okdxa-bounces at mailman.qth.net [mailto:okdxa-bounces at mailman.qth.net]
> On Behalf Of John Geiger
> Sent: Friday, February 28, 2020 2:23 PM
> To: Oklahoma DX Association
> Subject: Re: [OKDXA] FT8 F/H question
>
> Hi Tom,
>
> Thanks for the reply, that is what I use also for F/H.  Suppose I am on
> 18.100 running FT8 and VP8PJ
> shows up on 18.095.  Is there a way to switch to 18.095 just using the
> WSJT-X software?
>
> 73 John W5TD
>
> On Fri, Feb 28, 2020 at 2:17 PM Thomas Webb <tmwebb at cox.net> wrote:
>
> > John,
> >
> >      I use 'Fake It' vs 'Rig'.  Works fine.
> >
> > Tom, WA9AFM
> >
> > -----Original Message-----
> > From: okdxa-bounces at mailman.qth.net
> > [mailto:okdxa-bounces at mailman.qth.net]
> > On Behalf Of John Geiger
> > Sent: Friday, February 28, 2020 2:12 PM
> > To: Oklahoma DX Association
> > Subject: [OKDXA] FT8 F/H question
> >
> > For those of you who know WSJT-X better than I, I have a questions:
> >
> > Many F/H DX operations on FT8 are not on the traditional FT8
> > frequencies entered into the software.
> > In the WSJT-X program, is there a way to change the frequency using
> > the software when doing rig control?  It would be nice to change to
> > the F/H frequencies when chasing DX and operating remotely.
> >
> > 73 John W5TD
> > ______________________________________________________________
> > OKDXA mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/okdxa
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:OKDXA at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net Please help support this email
> > list: http://www.qsl.net/donate.html
> >
> > ______________________________________________________________
> > OKDXA mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/okdxa
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:OKDXA at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net Please help support this email
> > list: http://www.qsl.net/donate.html
> >
> ______________________________________________________________
> OKDXA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/okdxa
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:OKDXA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> OKDXA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/okdxa
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:OKDXA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
> ______________________________________________________________
> OKDXA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/okdxa
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:OKDXA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>