[OKDXA] FT8 F/H question

[GARYLM at kiamichiwb.org]

THE ONLY WAY I HAVE FOUND TO CHANGE FREQ IS GOING TO WSJT-X LOG AND CHANGE IT THERE,  60M IS NOT IN THE PROGRAM EITHER SO HAVE TO GO TO WSJT=X LOG AND CHANGE IT MANUALLY AND HIT SAVE.  GOOD LUCK, I WOULD LIKE TO KNOW TOO IF THERE IS A BETTER WAY, AND TO ADD FREQ TO PROGRAM.

73
GARY - WQ5R

--- tmwebb at cox.net wrote:

From: "Thomas Webb" <tmwebb at cox.net>
To: "'Oklahoma DX Association'" <okdxa at mailman.qth.net>
Subject: Re: [OKDXA] FT8 F/H question
Date: Fri, 28 Feb 2020 14:27:57 -0600

I'm not sure about that.  I usually just turn the dial. 

-----Original Message-----
From: okdxa-bounces at mailman.qth.net [mailto:okdxa-bounces at mailman.qth.net] On Behalf Of John Geiger
Sent: Friday, February 28, 2020 2:23 PM
To: Oklahoma DX Association
Subject: Re: [OKDXA] FT8 F/H question

Hi Tom,

Thanks for the reply, that is what I use also for F/H.  Suppose I am on 18.100 running FT8 and VP8PJ
shows up on 18.095.  Is there a way to switch to 18.095 just using the WSJT-X software?

73 John W5TD

On Fri, Feb 28, 2020 at 2:17 PM Thomas Webb <tmwebb at cox.net> wrote:

> John,
>
>      I use 'Fake It' vs 'Rig'.  Works fine.
>
> Tom, WA9AFM
>
> -----Original Message-----
> From: okdxa-bounces at mailman.qth.net 
> [mailto:okdxa-bounces at mailman.qth.net]
> On Behalf Of John Geiger
> Sent: Friday, February 28, 2020 2:12 PM
> To: Oklahoma DX Association
> Subject: [OKDXA] FT8 F/H question
>
> For those of you who know WSJT-X better than I, I have a questions:
>
> Many F/H DX operations on FT8 are not on the traditional FT8 
> frequencies entered into the software.
> In the WSJT-X program, is there a way to change the frequency using 
> the software when doing rig control?  It would be nice to change to 
> the F/H frequencies when chasing DX and operating remotely.
>
> 73 John W5TD
> ______________________________________________________________
> OKDXA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/okdxa
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:OKDXA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> OKDXA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/okdxa
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:OKDXA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html
>
______________________________________________________________
OKDXA mailing list
Home: http://mailman.qth.net/mailman/listinfo/okdxa
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:OKDXA at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
OKDXA mailing list
Home: http://mailman.qth.net/mailman/listinfo/okdxa
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:OKDXA at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html