[NLRS] Looking for SMA connector P/N

[WA2VOI, Donn]

Hi Jon

Johnson part numbers
Gold: 142-0694-011 (brass, gold plated)
Nickel: 142-0694-016 (solid nickel)

Digi-Key     (nickel) J486-ND
Mouser  (nickel) 530-142-0694-016
( would GUESS the gold ones are "530-142-0694-011"... enter that and see what comes up)

I use the nickel version and have a reasonable stock on hand if you need some now.  Have 
used both, the nickel ones solder as well as the gold ones.  Lifetime of the nickel is 
longer than w/gold, if lots of connection cycles is needed (stainless even better, but 
$$$)

73 Donn


----- Original Message ----- 
From: "Jon Platt via NLRS" <nlrs at mailman.qth.net>
To: "NRLS Reflector" <nlrs at mailman.qth.net>
Sent: Thursday, June 20, 2024 3:48 PM
Subject: [NLRS] Looking for SMA connector P/N


My head is getting dizzy looking at connectors. Does anyone know the DigiKey or Mouser 
part number for a male SMA connector for semi rigid 0.141, solder style, where the center 
pin is formed by the 0.141 center conductor? All the SMA connectors that I've been look at 
have solder on center pins, not what I want.
73, JonW0ZQ


--------------------------------------------------------------------------------


> ______________________________________________________________
> NLRS mailing list
> Home: https://mailman.qth.net/mailman/listinfo/nlrs
> Help: https://mailman.qth.net/mmfaq.htm
> Post: mailto:NLRS at mailman.qth.net
>
> This list hosted by: https://www.qsl.net
> Please help support this email list: https://www.qsl.net/donate.html