[NLRS] WSJTX and N1MM at the same time

[ed_richardson at shaw.ca]

Here are my key settings, some of these may not be relevant.

In N1MM, 
	1. <Configure> <Broadcast Data>
		Enable the "Contacts" box with setting 127.0.0.1:12060

	2.<configure><WSJT/JTDX Setup>
		Under the UDP settings section  for radio 1 I check the
enable box with settings IP address 127.0.0.1 and UDP port 2333 
		Under the JTDX / others TCP settings section  for radio 1 I
check the enable box with settings IP address 127.0.0.1 and
UDP port 2237
		The path to WSJT/JTDX is not set
		The auto load the WSJT Decode list  is not enabled.

In WSJT-X
	1.   <File><Settings><Reporting>
		Under Network Service, I have enabled PSK Reporting using
127.0.0.1:2237.  I have also checked all three boxes (Accept UDP Requests,
Notify on accepted, Accepted UDP requests Restores Window)
		Under Secondary UDP Server (Deprecated), I have enabled by
checking the box and set IP=127.0.0.1 and port = 2333  (This is the same
port as N1MM)

In JT Alert
	1. <Manage Settings><Logging><Last QSO API>
		Under UDP transmission, checked the box  and set the UDP
port to 2333.
	2. <Manage Settings><Logging>
		I do not have any other logs enabled.   I have not tried
enabling any other logs so I do not know if that is an issue.

So with this setup JT alert broadcasts the log entry on port 2333 and N1MM+
receives it.   When I am done I simply import my ADIF from N1MM+ into my
favourite logging program.

I have not tried two radios with dual instances of WSJT-x yet.

Ed VE4VT