[NLRS] FW: VHF low pass filters?

[Matt Arthur]

HI Gary and all,
Those are good points Gary.
there is a good chance that the nabor will just expect that he doesn't have
to do anything but the problem is the ham's falt.
so then at that point the nabor is on his own.
I finally got to that point with one here.
I have a nabor with a suround sound system that is out right junk.
infact he is using clip leads as part of his speecker wire.
He refewses to fix it so he can just put up with it.
I would not back down to some one who just wants to be a problem.
Thanks 73 Matt ka0pqw
----- Original Message ----- 
From: "Gary Mohrlant" <w0ghz at arrl.net>
Cc: <nlrs at mailman.qth.net>
Sent: Wednesday, January 02, 2013 11:24 AM
Subject: Re: [NLRS] FW: VHF low pass filters?


>
>
>
>
> Recommend fixes, maybe provide parts but let them install them. If
> anything goes wrong after you have worked on the problem you will be the
> cause of it and they will want you to fix or replace the defective TV ,
etc.
>
>
>
> I had problems before with cordless phones on 49Mhz and also 902Mhz
> I tried to tell them that there was nothing I could do for them but they
> didn't believe me.
>
> I gave them the FCC phone number so they can call and be told it really
> isn't your problem.Also provide them with your call if they do call the
FCC
>
> Gary  W0GHZ
>
>
>
> ______________________________________________________________
> NLRS mailing list
> Home: http://mailman.qth.net/mailman/listinfo/nlrs
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:NLRS at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html