[NLRS] New Beacon

[Matt Arthur]

Hi Scott,
ok cool i will give it a listen.
73 Matt ka0pqw
----- Original Message ----- 
From: "Scott" <acepilotREMOVE at bloomer.net>
To: "Chippewa Valley VHF" <cvvhf at cvvhf.org>; "NLRS List"
<nlrs at mailman.qth.net>
Sent: Saturday, May 10, 2008 9:54 PM
Subject: [NLRS] New Beacon


>
>
> Hi all,
>
> I just finished up the 432 beacon project I've had parts for laying
> around for some time.  Finally assembled them all into one box.
> Anyways, it running right now for burn in.  I still need a couple chip
> caps for the PA module, so the PA is still on the bench and the beacon
> is running at 100 mW.
>
> Particulars:
>
> Freq: 432.324 MHz (that will be the final freq.  It is about 200 Hz low
> as I write this)
> Power:  100 mW (after PA is done, it will be at about 4 Watts)
> Location: EN45fa for burn in.  Will be moving to EN45vk on Tuesday, May
> 13.  (Timm's Hill, Ogema, WI - Wisconsin's highest point)
> Antenna: 11 element VJB Cheap Yagi beaming about 250 degrees at 6'
> AGL).  When moved to permanent site, antenna will be 432 HoLoop at 170'
AGL
>
> Reception reports welcomed!
>
>
> -- 
> Scott N0EDV
> http://corbenflyer.tripod.com/
> Flying Corben Junior Ace - Building RV-4
> Gotta Fly or Gonna Die
>
>
> _______________________________________________
> NLRS mailing list
> NLRS at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/nlrs