[NJARC] IF Coil help

[Robert Bennett]

Hello Joe -
                   I’ve run into this problem more than once. Could find one from a parts set and if it’s more that 15.1 ohms, you could remove turns until you get lost to the correct resistance. I’ve had to do this more than once…

> https://www.youtube.com/watch?v=NK_yVqYxE2w <https://www.youtube.com/watch?v=NK_yVqYxE2w>

Go to about 7:20 in the video to see the repair I did.

Bob Bennett

> On Apr 27, 2017, at 9:17 AM, TrainBee via NJARC <njarc at mailman.qth.net> wrote:
> 
> Just remember
> Reply = Poster
> Reply All = Everyone
> 
> _________________________________________________________
> I need to fix or replace an IF coil for an Air King A-511 
> 
> 
> The coil is wrapped like a turks cap with 2 strand, cloth wrapped wire.  It looks to be about 33 gauge wire per strand.  Does anyone have any experience in unwinding these?  Is there an easier fix such as a replacement?  If I was to rewind the coil, what type of wire should I use?  
> 
> Attached are some pictures of the coil. The Sams sheet gives the coil a spec of 15.1 ohms.  
> 
> Thanks for any help.
> Joe Devonshire
> <100_7112.JPG><100_7113.JPG>______________________________________________________________
> NJARC mailing list
> Home: http://mailman.qth.net/mailman/listinfo/njarc
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:NJARC at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/mailman/private/njarc/attachments/20170427/b06472fb/attachment.html>