[NJARC] clarion call: 3.16 ohm and 4.0 ohm wirewound resistor

[William S Zukowski]

Mat,
Found the resistors I had for the 630, but they're 90.9 ohms and 909 
ohms.  I think they're for the two lower resistance ranges.  Sorry.
Bill


On Thu, Mar 10, 2016 at 08:09 PM, Matt Reynolds wrote:
Just remember

Reply = Poster

Reply All = Everyone



_________________________________________________________





NJARC members,




Sort of a long shot, but just wanted to see if anyone out there has a 
spare 3.16 ohm and a 4.0 ohm wirewound resistor 1% or better?  1/2watt 
should be sufficient.  I'm trying to fix the low scale on an analog VOM 
(Triplett 630)  that doesn't quite make it
  to 0 on the first two ranges.  If my digital meter is to be believed, 
the ones in the set are drifting upward.




  I realize these are not standard values (anymore), so before I try to 
order one I thought I'd see if any of you could spot me one of each?




I'll be at the meeting tomorrow night with the caps, as per usual. 
 Thank you!




Matt


______________________________________________________________

NJARC mailing list

Home: http://mailman.qth.net/mailman/listinfo/njarc 
<http://mailman.qth.net/mailman/listinfo/njarc>

Help: http://mailman.qth.net/mmfaq.htm 
<http://mailman.qth.net/mmfaq.htm>

Post: mailto:NJARC at mailman.qth.net



This list hosted by: http://www.qsl.net <http://www.qsl.net>

Please help support this email list: http://www.qsl.net/donate.html 
<http://www.qsl.net/donate.html>


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/mailman/private/njarc/attachments/20160312/98ac69e1/attachment.html>