[NCARC] My situation

[Kerry Miller]

Hi People,

I have purchased an antenna tower.  The tower is in Centennial Wyoming
and I need help getting the tower home.  A possibility is Bob WS7C has 3
of these towers and if someone with a trailer or truck capable of
hauling the tower/s to the Loveland area.  Costs may be negotiable.

The tower description as Bob described the towers:

For Sale - crank-up tower similiar to the TX Series by US Tower.  The
TX 
Series in the HRO Magazine has the best description.  It measures 9
inches across the top section and 11 inches across the bottom and has
two 
sections 20 ft high.  Includes hand winch and cable, tilt over base, and
two 
sets of guy cables.  One set of three cables with turnbuckles for the
lower 
section and one set of three cables with turnbuckles for the upper
section.

It also has a cross piece of pipe at 36 inches from the top of the
lower 
section.  This allows one to let the top section down and stand on this 
piece and work on antennas.  The top section has a two 2 inch openings
for a 
mast.  One is at the top of the center section and the other is 32
inches 
below.  The top section measures 6 1/2 inches between tower legs and 13 
inches between the cross braces.  This is the space available for
getting a 
rotor inside the tower.

73
-- 
Kerry N0WIQ
My web site URL is:
http://mywebpages.comcast.net/n0wiq