[MVMA] Stable release 3.23.12.0 update
John Westerkamp
westerkampj at gmail.com
Mon Dec 4 19:55:12 EST 2023
Which firmware should we use for the large high power Mikrotik dish? For
some reason, my current BBush dish (which is a large high power dish) says
it is a regular LHG 5HPnD and I can only update it with the regular
lhg-5hpnd firmware. If I try to load the lhg-5hpnd-xl firmware, it rejects
it. Could the model have been changed/altered somewhere along the way when
I first flashed the device?
Thanks!
John
W8LRJ
On Mon, Dec 4, 2023 at 7:47 PM Chuck Gelm <nc8q-aredn at gelm.net> wrote:
> KE8MVM-LHG-MVHS-XeniaNorth 10.252.119.123 2023-12-04 19:09:35 0 days,
> 1:28:32 a:3:{i:0;d:0.03;i:1;d:0.01;i:2;i:0;} MikroTik RouterBOARD LHG
> 5HPnD 3.23.12.0
> KE8MVM-MVHS-Ferry 10.133.179.201 2023-12-04 19:09:29 0 days, 1:33:14
> a:3:{i:0;i:0;i:1;i:0;i:2;i:0;} MikroTik RouterBOARD SXT 5HPnD (SXT 5 High
> Power) 3.23.12.0
> NC8Q-AssyHall-to-Building-1 10.39.96.184 2023-12-04 19:09:11 0 days,
> 1:59:52 a:3:{i:0;i:0;i:1;i:0;i:2;i:0;} MikroTik RouterBOARD SXT 5HPnD
> (SXT 5 High Power) 3.23.12.0
> NC8Q-Centerville-Bellbrook 10.216.251.75 2023-12-04 19:09:33 0 days,
> 1:35:36 a:3:{i:0;i:0;i:1;i:0;i:2;i:0;} MikroTik RouterBOARD LHG 5nD
> 3.23.12.0
> NC8Q-Centerville-Kettering 10.110.156.47 2023-12-04 19:09:25 0 days,
> 1:25:55 a:3:{i:0;d:0.02;i:1;d:0.01;i:2;i:0;} MikroTik RouterBOARD LHG
> 5HPnD-XL 3.23.12.0
> NC8Q-Centerville-Miamisburg 10.209.208.123 2023-12-04 19:09:32 0 days,
> 1:40:54 a:3:{i:0;i:0;i:1;i:0;i:2;i:0;} MikroTik RouterBOARD SXT 5nD (SXT
> Lite5) 3.23.12.0
> NC8Q-Dayton-Mall-ESE 10.153.38.12 2023-12-04 19:09:30 0 days, 2:08:08
> a:3:{i:0;i:0;i:1;i:0;i:2;i:0;} MikroTik RouterBOARD SXT 5HPnD (SXT 5 High
> Power) 3.23.12.0
> NC8Q-Dayton-Mall-North 10.39.179.113 2023-12-04 19:09:12 0 days, 2:09:35
> a:3:{i:0;i:0;i:1;i:0;i:2;i:0;} MikroTik RouterBOARD SXT 5HPnD (SXT 5 High
> Power) 3.23.12.0
> NC8Q-Hamvention-to-XeniaN 10.2.5.104 2023-12-04 19:09:03 0 days, 1:57:58
> a:3:{i:0;i:0;i:1;d:0.01;i:2;i:0;} MikroTik RouterBOARD SXT 5HPnD (SXT 5
> High Power) 3.23.12.0
> NC8Q-HuberHeights-Centerville 10.37.48.38 2023-12-04 19:09:11 0 days,
> 1:30:10 a:3:{i:0;i:0;i:1;i:0;i:2;i:0;} MikroTik RouterBOARD LHG 5HPnD-XL
> 3.23.12.0
> NC8Q-Kettering-Centerville 10.131.89.57 2023-12-04 19:09:28 0 days,
> 2:27:22 a:3:{i:0;d:0.02;i:1;d:0.01;i:2;i:0;} MikroTik RouterBOARD LHG
> 5HPnD-XL 3.23.12.0
> NC8Q-LHG-5HP 10.64.192.66 2023-12-04 19:09:13 0 days, 2:59:58
> a:3:{i:0;i:0;i:1;i:0;i:2;i:0;} MikroTik RouterBOARD LHG 5HPnD 3.23.12.0
> NC8Q-LHG-5n 10.156.133.175 2023-12-04 19:09:30 0 days, 3:09:50
> a:3:{i:0;d:0.06;i:1;d:0.01;i:2;i:0;} MikroTik RouterBOARD LHG 5nD
> 3.23.12.0
> NC8Q-Miamisburg-Centerville 10.97.121.243 2023-12-04 19:09:22 0 days,
> 2:02:20 a:3:{i:0;d:0.08;i:1;d:0.03;i:2;d:0.01;} MikroTik RouterBOARD SXT
> 5nD (SXT Lite5) 3.23.12.0
> NC8Q-Miamisburg-Monroe 10.172.206.37 2023-12-04 19:09:30 0 days, 2:12:14
> a:3:{i:0;d:0.03;i:1;d:0.01;i:2;i:0;} MikroTik RouterBOARD LHG 5HPnD-XL
> 3.23.12.0
> NC8Q-SXT-5ac 10.146.190.38 2023-12-04 19:09:29 0 days, 3:09:18
> a:3:{i:0;d:0.14;i:1;d:0.08;i:2;d:0.02;} MikroTik SXTsq 5 ac
> (RBSXTsqG-5acD) 3.23.12.0
> NC8Q-XeniaN-to-Hamvention 10.34.180.175 2023-12-04 19:09:10 0 days,
> 1:57:40 a:3:{i:0;i:0;i:1;i:0;i:2;i:0;} MikroTik RouterBOARD SXT 5HPnD
> (SXT 5 High Power) 3.23.12.0
> W8LRJ-BBush-MVHS 10.252.110.179 2023-12-04 19:09:35 0 days, 1:17:31
> a:3:{i:0;d:0.03;i:1;d:0.06;i:2;d:0.07;} MikroTik RouterBOARD LHG 5HPnD
> 3.23.12.0
> W8LRJ-hAP 10.54.123.207 2023-12-04 19:09:12 0 days, 1:18:19
> a:3:{i:0;i:0;i:1;i:0;i:2;i:0;} MikroTik RouterBOARD 952Ui-5ac2nD (hAP ac
> lite) 3.23.12.0
> W8LRJ-MVHS-Beavercreek 10.124.43.250 2023-12-04 19:09:27 0 days, 1:34:36
> a:3:{i:0;i:0;i:1;i:0;i:2;i:0;} MikroTik RouterBOARD LHG 5HPnD 3.23.12.0
>
> Updates:
>
> *Merged pull requests:*
>
> - Add release notes for pending release. #985
> <https://github.com/aredn/aredn/pull/985> (aanon4
> <https://github.com/aanon4>)
> - Detect if we support firstboot mode #965
> <https://github.com/aredn/aredn/pull/965> (aanon4
> <https://github.com/aanon4>)
> - Revert accidental feeds change #962
> <https://github.com/aredn/aredn/pull/962> (aanon4
> <https://github.com/aanon4>)
> - Improve dual radio customization support #961
> <https://github.com/aredn/aredn/pull/961> (aanon4
> <https://github.com/aanon4>)
> - Use frequency list for scan. #960
> <https://github.com/aredn/aredn/pull/960> (aanon4
> <https://github.com/aanon4>)
> - Bump Ubiquiti version number for LiteBeam 5AC #959
> <https://github.com/aredn/aredn/pull/959> (aanon4
> <https://github.com/aanon4>)
> - Super Mesh -> Cloud Mesh #957
> <https://github.com/aredn/aredn/pull/957> (aanon4
> <https://github.com/aanon4>)
> - Run cron.boot tasks earlier #955
> <https://github.com/aredn/aredn/pull/955> (aanon4
> <https://github.com/aanon4>)
> - change pollrate default to one hour #954
> <https://github.com/aredn/aredn/pull/954> (ab7pa
> <https://github.com/ab7pa>)
> - Improve the way we HUP dnsmasq #953
> <https://github.com/aredn/aredn/pull/953> (aanon4
> <https://github.com/aanon4>)
> - Remove vestigial getServicesBy* methods #952
> <https://github.com/aredn/aredn/pull/952> (bwarden
> <https://github.com/bwarden>)
> - Implement nodes=1 in sysinfo.json to return number of mesh nodes #951
> <https://github.com/aredn/aredn/pull/951> (bwarden
> <https://github.com/bwarden>)
> - Read supernode status from /etc/config.mesh #946
> <https://github.com/aredn/aredn/pull/946> (aanon4
> <https://github.com/aanon4>)
> - Supernode improvements #945 <https://github.com/aredn/aredn/pull/945>
> (aanon4 <https://github.com/aanon4>)
> - Supernode fixes #944 <https://github.com/aredn/aredn/pull/944> (
> aanon4 <https://github.com/aanon4>)
> - Which to “support” rather than “ignore” supernode to avoid
> double-negative #942 <https://github.com/aredn/aredn/pull/942> (aanon4
> <https://github.com/aanon4>)
> - Rebind protection stops recursive dns working #941
> <https://github.com/aredn/aredn/pull/941> (aanon4
> <https://github.com/aanon4>)
> - fix tunnel weight UI typo #940
> <https://github.com/aredn/aredn/pull/940> (ab7pa
> <https://github.com/ab7pa>)
> - Fixes for subdns #939 <https://github.com/aredn/aredn/pull/939> (
> aanon4 <https://github.com/aanon4>)
> - Supernode support #938 <https://github.com/aredn/aredn/pull/938> (
> aanon4 <https://github.com/aanon4>)
> - Set tunnel weight to 1 and provide UI to change it. #937
> <https://github.com/aredn/aredn/pull/937> (aanon4
> <https://github.com/aanon4>)
> - Fix dnsmasq directive #936 <https://github.com/aredn/aredn/pull/936>
> (aanon4 <https://github.com/aanon4>)
> - Support wildcard DNS subdomains #935
> <https://github.com/aredn/aredn/pull/935> (aanon4
> <https://github.com/aanon4>)
> - add new wording for devices no longer recommended #934
> <https://github.com/aredn/aredn/pull/934> (ab7pa
> <https://github.com/ab7pa>)
> - Lqm neighbor improvements #933
> <https://github.com/aredn/aredn/pull/933> (aanon4
> <https://github.com/aanon4>)
> - Auto reinstall package improvements #932
> <https://github.com/aredn/aredn/pull/932> (aanon4
> <https://github.com/aanon4>)
> - Add installable cron package for people who need more functionality
> #931 <https://github.com/aredn/aredn/pull/931> (aanon4
> <https://github.com/aanon4>)
> - Remember and reinstall packages after firmware upgrade #930
> <https://github.com/aredn/aredn/pull/930> (aanon4
> <https://github.com/aanon4>)
> - Force rebuild (aredn_packages has changed) #929
> <https://github.com/aredn/aredn/pull/929> (aanon4
> <https://github.com/aanon4>)
> - update status for glinet devices #927
> <https://github.com/aredn/aredn/pull/927> (ab7pa
> <https://github.com/ab7pa>)
> - Xlink broadcast #926 <https://github.com/aredn/aredn/pull/926> (
> aanon4 <https://github.com/aanon4>)
> - Correctly set wifi wan mode when depending on the mesh wifi setting
> #925 <https://github.com/aredn/aredn/pull/925> (aanon4
> <https://github.com/aanon4>)
> - LZ77 firmware decompression for new Mikrotik devices #923
> <https://github.com/aredn/aredn/pull/923> (aanon4
> <https://github.com/aanon4>)
> - Disable lz77 until problems resolved #922
> <https://github.com/aredn/aredn/pull/922> (aanon4
> <https://github.com/aanon4>)
> - Add LZ77 decompression for newer Mikrotik devices #920
> <https://github.com/aredn/aredn/pull/920> (aanon4
> <https://github.com/aanon4>)
> - Simpler search #918 <https://github.com/aredn/aredn/pull/918> (aanon4
> <https://github.com/aanon4>)
> - Fix32381 #917 <https://github.com/aredn/aredn/pull/917> (dman776
> <https://github.com/dman776>)
> - cci: add more to automate release #916
> <https://github.com/aredn/aredn/pull/916> (dman776
> <https://github.com/dman776>)
>
>
>
>
> _______________________________________________
> MVMA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/mvma
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:MVMA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/mvma/attachments/20231204/7aa8b91a/attachment-0001.html>
More information about the MVMA
mailing list