Which firmware should we use for the large high power Mikrotik dish? For some reason, my current BBush dish (which is a large high power dish) says it is a regular LHG 5HPnD and I can only update it with the regular lhg-5hpnd firmware. If I try to load the lhg-5hpnd-xl firmware, it rejects it. Could the model have been changed/altered somewhere along the way when I first flashed the device?

Thanks!

John
W8LRJ

On Mon, Dec 4, 2023 at 7:47 PM Chuck Gelm <nc8q-aredn@gelm.net> wrote:
KE8MVM-LHG-MVHS-XeniaNorth 10.252.119.123 2023-12-04 19:09:35 0 days, 1:28:32 a:3:{i:0;d:0.03;i:1;d:0.01;i:2;i:0;} MikroTik RouterBOARD LHG 5HPnD 3.23.12.0
KE8MVM-MVHS-Ferry 10.133.179.201 2023-12-04 19:09:29 0 days, 1:33:14 a:3:{i:0;i:0;i:1;i:0;i:2;i:0;} MikroTik RouterBOARD SXT 5HPnD (SXT 5 High Power) 3.23.12.0
NC8Q-AssyHall-to-Building-1 10.39.96.184 2023-12-04 19:09:11 0 days, 1:59:52 a:3:{i:0;i:0;i:1;i:0;i:2;i:0;} MikroTik RouterBOARD SXT 5HPnD (SXT 5 High Power) 3.23.12.0
NC8Q-Centerville-Bellbrook 10.216.251.75 2023-12-04 19:09:33 0 days, 1:35:36 a:3:{i:0;i:0;i:1;i:0;i:2;i:0;} MikroTik RouterBOARD LHG 5nD 3.23.12.0
NC8Q-Centerville-Kettering 10.110.156.47 2023-12-04 19:09:25 0 days, 1:25:55 a:3:{i:0;d:0.02;i:1;d:0.01;i:2;i:0;} MikroTik RouterBOARD LHG 5HPnD-XL 3.23.12.0
NC8Q-Centerville-Miamisburg 10.209.208.123 2023-12-04 19:09:32 0 days, 1:40:54 a:3:{i:0;i:0;i:1;i:0;i:2;i:0;} MikroTik RouterBOARD SXT 5nD (SXT Lite5) 3.23.12.0
NC8Q-Dayton-Mall-ESE 10.153.38.12 2023-12-04 19:09:30 0 days, 2:08:08 a:3:{i:0;i:0;i:1;i:0;i:2;i:0;} MikroTik RouterBOARD SXT 5HPnD (SXT 5 High Power) 3.23.12.0
NC8Q-Dayton-Mall-North 10.39.179.113 2023-12-04 19:09:12 0 days, 2:09:35 a:3:{i:0;i:0;i:1;i:0;i:2;i:0;} MikroTik RouterBOARD SXT 5HPnD (SXT 5 High Power) 3.23.12.0
NC8Q-Hamvention-to-XeniaN 10.2.5.104 2023-12-04 19:09:03 0 days, 1:57:58 a:3:{i:0;i:0;i:1;d:0.01;i:2;i:0;} MikroTik RouterBOARD SXT 5HPnD (SXT 5 High Power) 3.23.12.0
NC8Q-HuberHeights-Centerville 10.37.48.38 2023-12-04 19:09:11 0 days, 1:30:10 a:3:{i:0;i:0;i:1;i:0;i:2;i:0;} MikroTik RouterBOARD LHG 5HPnD-XL 3.23.12.0
NC8Q-Kettering-Centerville 10.131.89.57 2023-12-04 19:09:28 0 days, 2:27:22 a:3:{i:0;d:0.02;i:1;d:0.01;i:2;i:0;} MikroTik RouterBOARD LHG 5HPnD-XL 3.23.12.0
NC8Q-LHG-5HP 10.64.192.66 2023-12-04 19:09:13 0 days, 2:59:58 a:3:{i:0;i:0;i:1;i:0;i:2;i:0;} MikroTik RouterBOARD LHG 5HPnD 3.23.12.0
NC8Q-LHG-5n 10.156.133.175 2023-12-04 19:09:30 0 days, 3:09:50 a:3:{i:0;d:0.06;i:1;d:0.01;i:2;i:0;} MikroTik RouterBOARD LHG 5nD 3.23.12.0
NC8Q-Miamisburg-Centerville 10.97.121.243 2023-12-04 19:09:22 0 days, 2:02:20 a:3:{i:0;d:0.08;i:1;d:0.03;i:2;d:0.01;} MikroTik RouterBOARD SXT 5nD (SXT Lite5) 3.23.12.0
NC8Q-Miamisburg-Monroe 10.172.206.37 2023-12-04 19:09:30 0 days, 2:12:14 a:3:{i:0;d:0.03;i:1;d:0.01;i:2;i:0;} MikroTik RouterBOARD LHG 5HPnD-XL 3.23.12.0
NC8Q-SXT-5ac 10.146.190.38 2023-12-04 19:09:29 0 days, 3:09:18 a:3:{i:0;d:0.14;i:1;d:0.08;i:2;d:0.02;} MikroTik SXTsq 5 ac (RBSXTsqG-5acD) 3.23.12.0
NC8Q-XeniaN-to-Hamvention 10.34.180.175 2023-12-04 19:09:10 0 days, 1:57:40 a:3:{i:0;i:0;i:1;i:0;i:2;i:0;} MikroTik RouterBOARD SXT 5HPnD (SXT 5 High Power) 3.23.12.0
W8LRJ-BBush-MVHS 10.252.110.179 2023-12-04 19:09:35 0 days, 1:17:31 a:3:{i:0;d:0.03;i:1;d:0.06;i:2;d:0.07;} MikroTik RouterBOARD LHG 5HPnD 3.23.12.0
W8LRJ-hAP 10.54.123.207 2023-12-04 19:09:12 0 days, 1:18:19 a:3:{i:0;i:0;i:1;i:0;i:2;i:0;} MikroTik RouterBOARD 952Ui-5ac2nD (hAP ac lite) 3.23.12.0
W8LRJ-MVHS-Beavercreek 10.124.43.250 2023-12-04 19:09:27 0 days, 1:34:36 a:3:{i:0;i:0;i:1;i:0;i:2;i:0;} MikroTik RouterBOARD LHG 5HPnD 3.23.12.0


Updates:

Merged pull requests:

  • Add release notes for pending release. #985 (aanon4)
  • Detect if we support firstboot mode #965 (aanon4)
  • Revert accidental feeds change #962 (aanon4)
  • Improve dual radio customization support #961 (aanon4)
  • Use frequency list for scan. #960 (aanon4)
  • Bump Ubiquiti version number for LiteBeam 5AC #959 (aanon4)
  • Super Mesh -> Cloud Mesh #957 (aanon4)
  • Run cron.boot tasks earlier #955 (aanon4)
  • change pollrate default to one hour #954 (ab7pa)
  • Improve the way we HUP dnsmasq #953 (aanon4)
  • Remove vestigial getServicesBy* methods #952 (bwarden)
  • Implement nodes=1 in sysinfo.json to return number of mesh nodes #951 (bwarden)
  • Read supernode status from /etc/config.mesh #946 (aanon4)
  • Supernode improvements #945 (aanon4)
  • Supernode fixes #944 (aanon4)
  • Which to “support” rather than “ignore” supernode to avoid double-negative #942 (aanon4)
  • Rebind protection stops recursive dns working #941 (aanon4)
  • fix tunnel weight UI typo #940 (ab7pa)
  • Fixes for subdns #939 (aanon4)
  • Supernode support #938 (aanon4)
  • Set tunnel weight to 1 and provide UI to change it. #937 (aanon4)
  • Fix dnsmasq directive #936 (aanon4)
  • Support wildcard DNS subdomains #935 (aanon4)
  • add new wording for devices no longer recommended #934 (ab7pa)
  • Lqm neighbor improvements #933 (aanon4)
  • Auto reinstall package improvements #932 (aanon4)
  • Add installable cron package for people who need more functionality #931 (aanon4)
  • Remember and reinstall packages after firmware upgrade #930 (aanon4)
  • Force rebuild (aredn_packages has changed) #929 (aanon4)
  • update status for glinet devices #927 (ab7pa)
  • Xlink broadcast #926 (aanon4)
  • Correctly set wifi wan mode when depending on the mesh wifi setting #925 (aanon4)
  • LZ77 firmware decompression for new Mikrotik devices #923 (aanon4)
  • Disable lz77 until problems resolved #922 (aanon4)
  • Add LZ77 decompression for newer Mikrotik devices #920 (aanon4)
  • Simpler search #918 (aanon4)
  • Fix32381 #917 (dman776)
  • cci: add more to automate release #916 (dman776)



_______________________________________________
MVMA mailing list
Home: http://mailman.qth.net/mailman/listinfo/mvma
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:MVMA@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html