[MVMA] KE8MVM-DARA-AGM5 QRT ~8:30 PM 8/27/2019.

[Chuck Gelm]

On 8/29/19 10:20 AM, William Curtice wrote:
> I wonder........
>
> 7:48 is typically a high-useage time for the ATV repeater.  Prior to 
> installing the bandpass filter on the DARA 2.4 node, the ATV repeater 
> would swamp the 2.4 node, and cause AGC pumping.  The AGM5 is further 
> down the tower .... with much more vertical separation ... but unlike 
> the Titanium Bullet, is in a plastic enclosure.
>
> Assuming the AGM5 responds to a physical reset, it may be worthwhile 
> to watch it's performance when the ATV digital and analog carriers are 
> on the air.
>
> If the ATV signal IS the issue, I don't know what we can do about it.  
> Would seem wise to solve this problem before installing the XWARN link 
> hardware.
>
> Bill

Hi, Bill:

  Last time something like this happened at ~4:37 AM. This time ~8:30 PM.
I might be informative to attempt to view the node with a directly 
connected laptop
before resetting it. Perhaps a 'soft' reboot would get it going again.

  In any case and from now on, it might be prudent to monitor the 'load 
average' periodically
to see if there is a 'slow' rise (days). Monitor 'free space/memory=' too.

Chuck


-- 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/mvma/attachments/20190830/4a010b32/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: sig.gif
Type: image/gif
Size: 3641 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/mvma/attachments/20190830/4a010b32/attachment.gif>