[MVMA] AREDN device firmware update: 2 and 5 GHz XW devices: good news + POE test

[Chuck Gelm]

For the record:

  I powered 3 nodes from (1) one 24V *0.5A 12W* Ubiquiti POE.
I set a thermometer on the POE.
After a few hours the display indicated *79 degrees* F.

  Next, I powered the same 3 nodes from (1) one 24V *1.0A 24W* Ubiquiti POE.
I set a thermometer on the POE.
After a few hours the display indicated *79 degrees* F.

Two (2) of the nodes were set to minimum TX power.
I may repeat this test with all nodes as maximum TX power.

Chuck

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/mvma/attachments/20181123/5e85866f/attachment.html>