[MVMA] NC8Q-MVHS back up

[Chuck Gelm]

On 09/30/2018 07:54 AM, Maurice Riggins wrote:
> I didn’t notice until I looked at the map this morning there is no 
> link between your MVHS and home 3.4s. Not sure what’s up with that.
Hi, Moe:

I thought I had mentioned at least once on the mvma list
that I had swapped POE injectors between MVHS-Omni and NC8Q-MVHS.

So, here it goes again.

When the MVMA Omni at MVHS failed sometime after an upgrade to 3.18.9.0,
I visited the site and (not thinking ths through) wanted to do a 'warm 
boot' on the Omni node.
None of the MVMA POE injectors were the Ubiquiti model with a reset 
button on the injector.
My POE injector was a Ubiquiti injector with a reset button.
I swapped my POE injector with the one powering the Omni - which caused 
a 'cold' boot. Doh!
After the Omni node rebooted I noticed that the 'normal' 2397 MHz links 
returned.
(It was my error not to recheck my 3 GHz link. Doh!)

I thought I had at least once suggested that MVMA replace the 'bad' POE 
injector.
I have not received a response from the MVMA.

;-) Does this require a vote at a meeting? ;-)


Chuck