[MVMA] The dates for the Dayton Mini Maker Faire are:,Saturday, August 4, 9:30 AM – 5 PM and Sunday, August 5, 12 PM – 5 PM
Chuck Gelm
nc8q-mesh at gelm.net
Fri Jun 22 10:47:04 EDT 2018
- Previous message: [MVMA] The dates for the Dayton Mini Maker Faire are:,Saturday, August 4, 9:30 AM – 5 PM and Sunday, August 5, 12 PM – 5 PM
- Next message: [MVMA] The dates for the Dayton Mini Maker Faire are:,Saturday, August 4, 9:30 AM – 5 PM and Sunday, August 5, 12 PM – 5 PM
- Messages sorted by:
[ date ]
[ thread ]
[ subject ]
[ author ]
Thanks, Larry.
What is in your 'go-box'?
I hope Henry is on this list.
Everyone:
Does anyone have a 'MyFi' device that can create a MOBILE G3/G4
hot-spot to ethernet (RJ-45) ?
Who was the *Point of Contact* for DARA last year?
Who is the PoC for DARA-Maker-Faire-2018?
I have no knowledge of anything whose name starts with 'Win'.
If there is to be any demonstration of "Win*", someone else will need to
organize and share.
I can bring my 'go-box' which contains:
locoM2
Grandstream 1630
GS108E managed switch configured as 3 Node, 4 LAN, 1 WAN; as per AREDN
documentation.
Chuck
On 06/22/2018 10:03 AM, Larry Baker wrote:
> Chuck
> Last year I brought my "go-box" and tried to connect to W8GCA-10 the
> local *Win Link express 440 server*.
> I tried but neither myself or Bill curtice were able too.
> I tried using Bill's endfed 40/20 meter antenna to try and get on HF
> and then connecting to *winLink* using *Winmore*
> a built in modem for HF within winlink express program, again no success
> DARA sets up a big tent MVMA was included we had several cameras one
> at the "build-off" site another in the tent
> where we were. there was a tent selling dongles for $20 and
> instructions for getting them on the air
> DARA had a kids "learn to solder" benches set up which proved popular.
> one year we placed cameras and phones all around the grounds BUT we
> did not plan and there were no signs letting
> people what they were for, first year we were inside at the door
> leading out to the grounds, the tent worked best.
> what are your plans? TEAMTALK, CAMERAS, use MVMA TV for displaying
> what ever is needed.
> and someone, not me who knows what MESH is and it's importance to EMCOMM.
>
> so TEAMTALK-----CAMERAS--------ROUTERS-------AND THE MVMA TV FOR
> DISPLAYING Plus a computer or two running the programs
> Bill and Henry would know more that I do................
>
> Larry Baker KB8EMD
>
>
> ------------------------------------------------------------------------
> *From:* mvma-bounces at mailman.qth.net <mvma-bounces at mailman.qth.net> on
> behalf of Chuck Gelm <nc8q-mesh at gelm.net>
> *Sent:* Friday, June 22, 2018 6:05 AM
> *To:* Amateur Radio network using AREDN, HSMM-MESH and other
> configurations
> *Subject:* [MVMA] The dates for the Dayton Mini Maker Faire
> are:,Saturday, August 4, 9:30 AM – 5 PM and Sunday, August 5, 12 PM –
> 5 PM
>
>
> The dates for the Dayton Mini Maker Faire are:
>
>
> Saturday, August 4, 9:30 AM – 5 PM and Sunday, August 5, 12 PM
> – 5 PM
>
> What happened last year(s)?
>
> What organization or who requested to be a presenter?
> MVMA, DMA, DARA, BARC, ...
>
> How was the tent obtained?
>
> Who brought what?
>
> Are there any emails or documents from last year's communication?
>
>
> Is their any 'Organizational Memory' from the last event(s)?
>
> *"Organizational memory* (OM) (sometimes called institutional or
> *corporate memory*) is the accumulated body of data, information, and
> knowledge created in the course of an individual organization's
> existence.'
>
> As opposed to:
> Tacit *knowledge* is the *knowledge* that someone has learned about
> something but isn't shared or documented.
>
> Chuck
>
>
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon>
> Virus-free. www.avast.com
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link>
>
>
>
>
> _______________________________________________
> MVMA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/mvma
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:MVMA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/mvma/attachments/20180622/237ec61a/attachment-0001.html>
- Previous message: [MVMA] The dates for the Dayton Mini Maker Faire are:,Saturday, August 4, 9:30 AM – 5 PM and Sunday, August 5, 12 PM – 5 PM
- Next message: [MVMA] The dates for the Dayton Mini Maker Faire are:,Saturday, August 4, 9:30 AM – 5 PM and Sunday, August 5, 12 PM – 5 PM
- Messages sorted by:
[ date ]
[ thread ]
[ subject ]
[ author ]
More information about the MVMA
mailing list