[MRCG] Help identify crystal container box

[Jay Coward via MRCG]

How do you get 4 versions from 2? Also, the crystals from my T-13 are too tall. The case lid hits the top of the crystals when you close it. 
. Not likely A.R.C. would design it that way.
 Jay
 
 
-----Original Message-----
From: Tim <timsamm at gmail.com>
To: Jay Coward <jcoward5452 at aol.com>; West Coast Military Radio Collectors Group <mrcg at mailman.qth.net>
Cc: scottjohnson1 <scottjohnson1 at cox.net>
Sent: Thu, May 14, 2015 5:37 pm
Subject: Re: [MRCG] Help identify crystal container box


 
  
   
Hi Jay - I think those T-363-366 designators are the military model numbers for the same radios...    
    
   
Tim   
  
N6CC  
 
 
  
  
On Thu, May 14, 2015 at 6:55 AM, Jay Coward via MRCG    <mrcg at mailman.qth.net> wrote:   
   
Scott,    
  Aren't the Type 12 Tx's T-11 and T-13? The /ARC is a military designator for Aircraft,Radio, Communication.    
     Jay
     
     
      
       
       
 -----Original Message-----      
 From: Scott Johnson <      scottjohnson1 at cox.net>      
 To: 'Jay Coward' <      jcoward5452 at aol.com>; 'West Coast Military Radio Collectors Group' <      mrcg at mailman.qth.net>      
 Sent: Wed, May 13, 2015 7:21 pm      
 Subject: RE: [MRCG] Help identify crystal container box      
       
       
 They're for the ARC type 12 post war aircraft transmitters.      
       
 Scott      
 W7SVJ      
       
 -----Original Message-----      
 From: MRCG      
 [mailto:      mrcg-bounces at mailman.qth.net] On Behalf Of Jay Coward via      
 MRCG      
 Sent:      
 Wednesday, May 13, 2015 6:16 PM      
 To:       mrcg at mailman.qth.net      
 Subject: [MRCG] Help      
 identify crystal container box      
       
       
 Group.      
  I just acquired a "cute" crystal      
 case on the ePay. It is a narrow, long      
 case, hinged at one end and has a      
 hasp/snap closure at the other end just      
 like what is used on (many) Mil test      
 gear covers. It holds 10  crystals with      
 FT-243/ CR-8 B/U pin spacing. It has      
 small flanges at each end with 2 holes      
 each (#4?) for mounting to something .      
       
 The top cover has the following:      
 CRYSTAL KIT CONTAINER FOR TRANSMITTERS      
       
 T-363/ARC                                    T-365/ARC      
  T-364/ARC      
 T-366/ARC      
       
 No other nameplate, absolutely nothing and no extra holes where      
 a      
 nomenclature plate could be mounted.      
       
  Mystery? Yes or No      
       
 Jay      
 KE6PPF      
 ______________________________________________________________      
 MRCG      
 mailing list      
 Home:       http://mailman.qth.net/mailman/listinfo/mrcg      
 Help:      
       http://mailman.qth.net/mmfaq.htm      
 Post: mailto:      MRCG at mailman.qth.net      
       
 Website:      
       http://www.mrcgwest.org      
       
 This list hosted by:       http://www.qsl.net      
 Please help      
 support this email list:       http://www.qsl.net/donate.html      
       
       
       
       
 ______________________________________________________________      
 MRCG mailing list      
 Home:       http://mailman.qth.net/mailman/listinfo/mrcg      
 Help:       http://mailman.qth.net/mmfaq.htm      
 Post: mailto:      MRCG at mailman.qth.net      
       
 Website:       http://www.mrcgwest.org      
       
 This list hosted by:       http://www.qsl.net      
 Please help support this email list:       http://www.qsl.net/donate.html