[MRCG] BC-610

[mac via MRCG]

Jim,

DX-100 is a straightforward piece of hardware.  The modulation  
xformers a known weak spot, though.

As we've discussed before you need to get some wire UP in the air.....

Dennis D.  W7QHO
Glendale, CA

*************
On Jul 21, 2014, at 9:58 AM, Falls, Jim at DOC wrote:

> 60W AM through a NVIS dipole isn't doing the job - I have Iron Envy.  
> Too bad Tokyo Hy-Power folded.
>
> I'm slowly debugging a hacked Heath DX-100. There is hope..........
>
> The iron and tubes are good, It has been completely re-capped and  
> the HV supply rebuilt, but I think the VFO is not operating (no  
> obvious RF output).
> I will try it on xtal as recommended to see if it's even oscillating.
>
> If no-go, back to the manual.........start checking resistors
>
> 73 ES GUD DX DE
> Jim Falls
>  K6FWT
>     Eureka CA
>      CN70ws
>
>
> ______________________________________________________________
> MRCG mailing list
> Home: http://mailman.qth.net/mailman/listinfo/mrcg
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:MRCG at mailman.qth.net
>
> Website: http://www.mrcgwest.org
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html