[MRCA] BC-348 Shockmount query

[Michael Hanz]

The stainless pins are indeed spot welded in four places to the .063" 
aluminum U-shaped subchassis on the bottom of the case proper, Jeep.  I 
would think they would be difficult to remove cleanly unless you milled 
the spots down to the case proper with a Bridgeport mill or equivalent.  
A chisel will just make a mess of things.  I like John's suggestion, 
though there are other possibilities depending on how complex/permanent 
you want to make it.

- Mike  KC4TOS



> On 9/1/2024 9:10 AM, Doran Platt via MRCA wrote:
>> Has anyone successfully removed the pins from the bottom of the 
>> receiver cabinet?  I have made several ersatz mounts in the past but 
>> the smaller size Barrymounts are now hard to find. It appears that 
>> the pin assy may be welded to the secondary part of the receiver 
>> case?  Any info?
>> Jeep K3HVG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/mrca/attachments/20240901/4ba1ee76/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: DSC07225.JPG
Type: image/jpeg
Size: 120401 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/mrca/attachments/20240901/4ba1ee76/attachment-0001.jpe>