[MRCA] Mite TTY Cable Update

[MilComm Guy]

Thank you for the positive comments.

On Wed, Nov 17, 2021 at 8:53 AM W2HX <w2hx at w2hx.com> wrote:

> Very nice. Good idea on the terminal strip. I do this regularly. And this
> is the best solution for getting cables with large connectors through
> walls. Cut the cable, move it through the wall and then reconnect both
> halves using a terminal strip as the interface.
>
>
>
> 73 Eugene W2HX
>
> Subscribe to my Youtube Channel:
> https://www.youtube.com/c/w2hx-channel/videos
>
>
>
>
>
>
>
> *From:* mrca-bounces at mailman.qth.net <mrca-bounces at mailman.qth.net> *On
> Behalf Of *MilComm Guy
> *Sent:* Wednesday, November 17, 2021 7:40 AM
> *To:* mrca at mailman.qth.net
> *Subject:* [MRCA] Mite TTY Cable Update
>
>
>
> Unable to locate a service cable so like the GRC-19 cable I decided to
> build my own.  I used the same CX-4722 cable and purchased a connector on
> eBay.  I terminated the connections on a terminal strip for now to make
> testing easier, will construct an enclosure similar to the original later
> on.  For some bling I added a shrink on label.
>
>
>
> Mark
>
> K1HF
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/mrca/attachments/20211117/2992246a/attachment.html>