[MRCA] Mystery Project Fini

[Rob Flory]

Nice work, Breck.  That tube clamp would make usual method challenging to
use, which is to wrap a piece of wire wrap wire around the pin of
interest(often a screen grid).

What piece of gear is that?

Be careful poking around on the top side of the tube!

RF

On Mon, Mar 29, 2021 at 11:51 PM B. Smith <smithab11 at comcast.net> wrote:

> I forgot about the tube clamps so I had to trim part of the PVC to make
> the base of the extender  fit.
> The numbers were created with a Brother Label Printer.  Once the pin
> number labels are  applied then coat them with clear finger nail polish
> from the Dollar Store  and they will survive a lot of  abuse.
> Improvise-Adapt-Overcome
> Z
>
>
> ______________________________________________________________
> MRCA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/mrca
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:MRCA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/mrca/attachments/20210330/42377218/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ecflghmenipnicmc.gif
Type: image/gif
Size: 9511 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/mrca/attachments/20210330/42377218/attachment-0001.gif>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: pinhbfgfjnpbebkh.jpg
Type: image/jpeg
Size: 106457 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/mrca/attachments/20210330/42377218/attachment-0001.jpg>