[MRCA] LS-166/U settings?

[Ray Fantini]

May have a difference depending on what radio you have it connected to. On radios like the GRC-106 there are two audio sources. One high level and one low so depending what level of audio you wanted that would determine what pin on the plug would be used. It's important to remember that the level difference takes place in the radio and not the speaker, the switch on the speaker selects between two different pins on the connector.


Ray F/KA3EKH



From: mrca-bounces at mailman.qth.net <mrca-bounces at mailman.qth.net> On Behalf Of KA1LHZ
Sent: Friday, October 25, 2019 3:10 PM
To: mrca at mailman.qth.net
Subject: Re: [MRCA] LS-166/U settings?


Volume level.


On 10/25/19 2:45 PM, W2HX wrote:

Hi there. What is the difference in functionality on the LS-166 for the two settings, "field or pack use" and "vehicular use". What is the difference?



thanks

Eugene







______________________________________________________________

MRCA mailing list

Home: http://mailman.qth.net/mailman/listinfo/mrca

Help: http://mailman.qth.net/mmfaq.htm

Post: mailto:MRCA at mailman.qth.net



This list hosted by: http://www.qsl.net

Please help support this email list: http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/mrca/attachments/20191025/ceb7520a/attachment-0001.html>