[MRCA] rubber covered audio cable for pl55 and pl68

[MKDORNEY at aol.com]

In a message dated 3/4/2017 12:27:52 P.M. Eastern Standard Time,  
mrca at mailman.qth.net writes:

It is highly unlikely that you will find equivalent cordage  at a hardware 
or appliance supplier.  The cords that Jeff is looking for  are all made 
from tinsel wire and require special self-piercing crimp ring  terminals.or 
special procedures to solder.

I a message dated 03/04/2017  09:47:43 AM Central Standard Time, 
crp.wd8axb at comcast.net writes: 

Jeff,
You can try a hardware store for rubbery double  insulated wire, 2 and 3 
conductor.
Also, an appliance repair shop might  have some similar cordage.
73,
Charlie WD8AXB

------ Original  Message ------
From: JEFF CICCONE
Sent: March 4, 2017 at 9:02  AM
Subject: [MRCA] rubber covered audio cable for pl55 and  pl68

folks 
anyone have a source for the right size 2 3 or 4 wire  cord that will fit 
in these plugs?. i also need to make up some cables to  fit in the ts series 
handsets and a motorola mic.   is there a  rubber bushing for a strain 
relief at the jack cord interface commercially  available?
thanks. jeff kg2bz



Robert & Susan  Downs - Houston
wa5cab dot com (Web Store)
MVPA  9480

______________________________________________________________
MRCA  mailing list
Home: http://mailman.qth.net/mailman/listinfo/mrca
Help:  http://mailman.qth.net/mmfaq.htm
Post:  mailto:MRCA at mailman.qth.net

This list hosted by:  http://www.qsl.net
Please help support this email list:  http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/mrca/attachments/20170305/667b1654/attachment.html>