[MRCA] T-195A more updates

[mac]

Robert,

OK, I t would appear that you have! PS-602 the schematic and  
explanation of which are included in the reference supplied by Dave  
Ross.

<https://picasaweb.google.com/RNNewberry/T195A?authuser=0&authkey=Gv1sRgCLnA_Za877aaQw&feat=directlink 
 >

Good luck

Dennis D., W7QHO
Glendale, CA

****************

On May 26, 2013, at 12:34 PM, Robert Newberry wrote:

> Mac,
>
> Try this link https://picasaweb.google.com/RNNewberry/T195A?authuser=0&authkey=Gv1sRgCLnA_Za877aaQw&feat=directlink
>
>
> On Sun, May 26, 2013 at 1:33 PM, mac <w7qho at aol.com> wrote:
> Bob,
>
> From my 1970 manual, TM 11-5820-335-35 there would appear to have  
> been at least 5 different variants of the HV solid state power  
> supply, A1200, A1200 (MOD 1), PS601, PS602 and a 5th version labeled  
> merely "Transistor-type  high-voltage power supply."  When I see  
> your pictures I may be able to identify and supply a schematic.
>
> Dennis D.  W7QHO
> Glendale, CA
>
> ************
>
> On May 26, 2013, at 9:24 AM, Robert Newberry wrote:
>
> Well I kinda made heads and tails of what I had. I have a T-195A  
> with a good working LV SS power supply. I have a box with a bad LV  
> supply, and HV supply and also in the box there is a complete set of  
> parts for a second HV supply.
>
> I was able to hook up the HV  supply to a power supply, I observed  
> output (couldn't quite tell exactly but at least 500 volts maybe a  
> 1000.... things were happening fast!) I then saw smoke emanating  
> from a big resistor on the side. I immediately disconnected  
> everything and saw what looked like bad/burnt out resistor, it had a  
> crack in the material and the resistor was quite warm. I know that  
> before I hooked it up I inspected the supply and I did note the  
> physical condition on the resistor. I also noted the fan was not  
> sniping that I could tell too.
>
> Maybe I'm nuts but it looks like I should be able to fix this thing,  
> it doesn't appear to have any black magic installed into it.
>
> I'm going to check all of the components one at a time. I'm also  
> going to post pics at a later date of two things on this supply that  
> I'm not quite sure what they are.
>
> Hopefully I can get a working HV supply going, My plan is get the  
> T-195A going, then I'm going to attempt to repair the LV supply and  
> re-assemble the parts for the HV supply to have spares.
>
> I'm fully documenting things with video and pictures for later.
>
> -Bob/N1XBM
> ______________________________________________________________
> MRCA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/mrca
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:MRCA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/mrca/attachments/20130526/0afd63cb/attachment-0001.html>