[MRCA] #19 Sets!

[J. Forster]

You need to be careful with AC supplies, especially for the MK IIIs. The
negative side of HT2 is not at ground. You need DC for the relays.

And the HT2 is rated at 540VDC as I remember, not 600VDC.

The non-coax connectors on everything WS19 are female at both ends of all
cables. Watch eBay.

-John

==============


>
>
>  Â Good day all!, With all the Talk about #19 Sets today I'd like to ask
> if anyone has Homebrewd an AC Supply for one of these Sets??  I have 3
> Of them 2 MK III and One MKII  While The Dynamotors are Cool  they are
> Noisey!  I have heard that you can Adapt a Heath HP-23 to power these up
> but the Voltages are to high! as the Components in the 19 are Rated at
> 600V,, any ideas ???  also i'd be interested in one of the  Female12
> Pin Connectors, For one of these Rigs!   if anyone has one 
>  Thanks  jeff W1AEA 
> ______________________________________________________________
> MRCA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/mrca
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:MRCA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>