[MRCA] T-195A test

[Ray Fantini]

Safety interlock and air flow switch, don't need the receiver. And you will find a 100 watt light bulb makes a great dummy load, you can watch it get brighter as the transmitter tunes itself.
RF

From: mrca-bounces at mailman.qth.net [mailto:mrca-bounces at mailman.qth.net] On Behalf Of Robert Newberry
Sent: Thursday, June 06, 2013 3:16 PM
To: mrca at mailman.qth.net
Subject: [MRCA] T-195A test


I'm getting ready to test my 195A. My plan was to use dummy load and follow the tune up directions in the manual. I do not have the cable yet to connect R-392.

Is there any reason or potential harm in just firing up and putting out a test signal into my dummy load with out the R-392 connected?

I'd like to be able to operate it out of the enclosure to watch for magic smoke, but I understand a safety interlock must be defeated.

Anyone have any suggestions on things that should be lubed, cleaned, or checked before fire up?

Apparare Scientior
Paratus Communicare
-N1XBM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/mrca/attachments/20130606/c5505cda/attachment.html>