[MRCA] W.S. #19 discussion

[J. Forster]

The holes are just for clearance. No bolts go through them. See my other
post.

Best,

-John

======================


> Odd, well they should fit the bolts on the tray, the side with no holes
> goes vertically.
>
> May be not all mounting trays have these bolts?
>
> Mike B
>
>
>
> On 29/04/2013 11:15, D. Platt wrote:
>> Gentlemen,
>>
>> I have another poser for the group.  These "mounts" were part of the
>> WS 19 foot locker I recently got.  Can nayone tell me what they're
>> for?  I can only assume they are part of the mounting of the system,
>> but the boilt patter does not seem to fit anything? Attached is the
>> photo of the four mounts.
>>
>> Regards   Jeep - K3HVG
>>
>>
>> ______________________________________________________________
>> MRCA mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/mrca
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:MRCA at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> MRCA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/mrca
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:MRCA at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html