[MRCA] Vibrators

[Transmaster]

Yes please send the socket diagram I can handle a TIF file. I was
looking through the parts stash and I find I have a brand new vibrator
transformer I just may be able to build an external power supply to
supply the needed voltages for the 15A and the AVT-112A so I can get
both of these cute little transmitters going.

Thanks
Ken

On 2/8/07, WA5CAB at cs.com <WA5CAB at cs.com> wrote:
> Ken,
>
> If you can read a .TIF, I can send you a file that includes VB-12 (and VB-11
> and VB-13).
>
> However, rather than rewiring the transmitter which is going to involve
> changing the socket, I'd suggest you build up a transistor astable replacement on
> an octal tube base.  You'll still need the vibrator basing in order to do that,
> though.
>
> VB-12's are scarce enough to be approaching the rare point.
>
> In a message dated 2/8/2007 3:15:44 PM Central Standard Time,
> 22hornet at gmail.com writes:
> > Can anyone point me to where I can get the base diagram for reed
> > vibrators.  I have an aviation transmitter RVT-15A that uses (I think)
> > a VB-12 vibrator, I have yet to find one, as you all know it has a
> > octal base.  I can get vibrators for both 6 and 12 volt operation but
> > they have either a 4 or a 6 pin base I want to see if it would be
> > practical to rewire this transmitter for one of these other vibrators.
> > I want to leave this little transmitter in as original shape as I
> > can.  This 15A isn't going to get much use so a reed vibrator's wear
> > cycle will be ok.
> >
>
> Robert Downs - Houston
> <http://www.wa5cab.com> (Web Store)
> MVPA 9480
> <wa5cab at cs.com> (Primary email)
> <wa5cab at houston.rr.com> (Backup email)
> _______________________________________________
> MRCA mailing list
> MRCA at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/mrca
>


-- 
Kenneth A. Crips, W7ITC Home of the Chew Crew,  Red Headed
Irish Terrier House Ninjas, Chic', and Cowboy
10th degree black belts in Mouch Fue, Bed Fue, and
Con Artist Fue.