[MRCA] need pwr connector pin connections to power CFD-60006ASigGen (no...

[Poli, Lou-p4924c]

Robert;
 Thanks for doing the homework. 
This power supply may do it. I will be in touch.

Also, if anyone else can find/furnish the power connector/pin connections or manual/references, I would greatly appreciate it.

Regards,
 Louis

-----Original Message-----
From: mrca-bounces at mailman.qth.net
[mailto:mrca-bounces at mailman.qth.net]On Behalf Of WA5CAB at cs.com
Sent: Saturday, August 19, 2006 1:09 PM
To: mrca at mailman.qth.net
Subject: Re: [MRCA] need pwr connector pin connections to power
CFD-60006ASigGen (no...


Louis,

The LP-(*) is just a signal generator.  Quoting NAVSHIPS 900,105, "Navy 
Models LP to LP-5 are devices for producing radio frequency oscillations,...".  
Besides the NT-60006-(*) and NT-20080-(*), the only other components are 
NT-66017-(*) Dummy Antenna Unit and NT-63710-(*) Attenuator Unit (and the manual which 
no one seems to turn up).

So the short answer is that the rectifier power supply drives the oscillator 
directly.

In a message dated 8/19/2006 2:43:06 PM Central Daylight Time, 
Lou.Poli at gdc4s.com writes: 
> Robert;
> Thank you. 
> Does the power supply drive the test equipment directly or the larger 
> composite radio set LP-5? 
> The only equipment I have is the Sig Gen.
> 
> In my shop I have AC and DC sources. I need the input description of the sig 
> gen power connector to complete the project.
> 
> I saw your web page. Nicely done and informative.
> Best regards,
> Louis

Robert & Susan Downs - Houston
<http://www.wa5cab.com> (Web Store)
MVPA 9480
<wa5cab at cs.com> (Primary email)
<wa5cab at houston.rr.com> (Backup email)
_______________________________________________
MRCA mailing list
MRCA at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/mrca