[Motorola] Saber I

[Tom B.]

the 255 channel capability leads me to believe you may have a 
'System-Saber'...different RSS required.

Just a thought...Tom B.

----- Original Message ----- 
From: "Glenn Little WB4UIV" <glennmaillist at bellsouth.net>
To: <motorola at mailman.qth.net>
Sent: Sunday, April 18, 2010 12:03 AM
Subject: [Motorola] Saber I


> Is there a Saber I service manual that includes component level 
> information?
> Is there a manual that includes block diagrams and module pin numbers?
> I realize that the Saber I manuals are probably no longer available
> from Motorola.
> I have two VHF Saber I's that when I read the codeplug, I get a
> checksum warning.
> When I look at the channel information the receiver or the transmit
> frequency may be an illegal frequency.
> When I fix the bad frequencies and reprogram the codeplug, there is
> other corrupt frequency data.
> The RSS indicates that the radio is downloading tuning information
> for 255 channels when I save the data to the codeplug.
> I suspect that i have a very corrupt radio.
>
> Any advice??
>
> Thanks
> 73
> Glenn
> WB4UIV
>
>
>
> ______________________________________________________________
> Motorola mailing list
> Home: http://mailman.qth.net/mailman/listinfo/motorola
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Motorola at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html