[Motorola] Astro Spectra Power Setting

[Brad Swanson]

It sounds like both high and low power are set for the same value in the
service and alignment section.

Brad

-----Original Message-----
From: motorola-bounces at mailman.qth.net
[mailto:motorola-bounces at mailman.qth.net] On Behalf Of Eric Lemmon
Sent: Saturday, July 19, 2008 10:43 PM
To: 'Discussion of equipment manufactured by Motorola'
Subject: [Motorola] Astro Spectra Power Setting

I am trying to program an Astro Consolette, Model L99DX+358L, which contains
a Spectra L04QKH9PW7AN radio.  This is an original radio that once was used
on a Government UHF trunked radio system in the 403-430 MHz band.

After cleaning out all of the trunking data, I programmed the radio to
operate on two conventional simplex channels at 425.0000 MHz for testing
purposes.  I programmed one for low power and one for high power.  Despite
repeated checks and re-checks of the programming, I cannot do anything to
alter the RF power output- both channels put out about 52 watts.

I have tried enabling and disabling the talkaround feature, to no avail.
The radio simply ignores the low and high power settings.  I don't have any
experience with Astro Spectra radios.  What am I missing, or doing wrong?
Any suggestions?

73, Eric Lemmon WB6FLY

______________________________________________________________
Motorola mailing list
Home: http://mailman.qth.net/mailman/listinfo/motorola
Help: http://mailman.qth.net/faq.htm
Post: mailto:Motorola at mailman.qth.net