[Motorola] M1225 TPL/DPL

[Eric Lemmon]

Just use a dummy mike plug with a jumper to simulate the hang-up ground
connection.

73, Eric Lemmon WB6FLY
 

-----Original Message-----
From: motorola-bounces at mailman.qth.net
[mailto:motorola-bounces at mailman.qth.net] On Behalf Of Bill Morphy
Sent: Sunday, January 21, 2007 9:19 AM
To: Discussion of equipment manufactured by Motorola
Subject: Re: [Motorola] M1225 TPL/DPL

I'm going to use the 1225 as a tone remote control station.  The interface 
will be done using a Remote Tone Adapter via the radio's rear accessory 
connector and a local desk mic plugged into the adapter.

I'd assume that there then needs to be a radio accessory connector pin 
programmed to get its mic hang ground from the adapter?