[Motorola] M1225 TPL/DPL

[Bill Morphy]

I'm going to use the 1225 as a tone remote control station.  The interface 
will be done using a Remote Tone Adapter via the radios rear accessory 
connector and a local desk mic plugged into the adapter.

I'd assume that there then needs to be a radio accessory connector pin 
programmed to get it's mic hang ground from the adapter?


----- Original Message ----- 
From: "tvsjr" <tvsjr at sprynet.com>
To: "'Discussion of equipment manufactured by Motorola'" 
<motorola at mailman.qth.net>
Sent: Saturday, January 20, 2007 10:20 PM
Subject: RE: [Motorola] M1225 TPL/DPL


> Do you have a mic attached, hung up to a grounded mic clip?
>
>> -----Original Message-----
>> From: motorola-bounces at mailman.qth.net [mailto:motorola-
>> bounces at mailman.qth.net] On Behalf Of Bill Morphy
>> Sent: Saturday, January 20, 2007 8:58 PM
>> To: Discussion of equipment manufactured by Motorola
>> Subject: [Motorola] M1225 TPL/DPL
>>
>> I have several M1225s in VHF and UHF flavor. I'm able to program them for
>> either DPL or TPL, but for some reason all receivers operate in CSQ.
>> Any ideas?
>> ______________________________________________________________
>> Motorola mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/motorola
>> Help: http://mailman.qth.net/faq.htm
>> Post: mailto:Motorola at mailman.qth.net
>
> ______________________________________________________________
> Motorola mailing list
> Home: http://mailman.qth.net/mailman/listinfo/motorola
> Help: http://mailman.qth.net/faq.htm
> Post: mailto:Motorola at mailman.qth.net