[Motorola] XTS-3000 UHF TX noise cure

[Coote, Jay]

If your agency uses the UHF XTS-3000, and has had noise in transmit, the
following info may help:

Some agencies who use the XTS-3000 UHF model, have had issues with noise in
the transmitted
carrier on all channels.  This noise sounds like a strong wind blowing in
the mike, or sounds like a loose
antenna connection.   In a radio with this issue, the problem may be
intermittent and can
be hard to re-create (though pressure on the case or antenna base often
shows the radio will have the problem).

In dealing with Motorola, I have learned that their first, earlier fix for
this problem is called SRN1397.
Motorola's newer fix is called SRN1473.  When writing up a radio with these
problems, be 
sure to suggest SRN1397 and SRN1473 on the write-up.

Hope this helps someone,

Jay