[Motorola] MSR5000
Doug Eaton
[email protected]
Sat, 23 Aug 2003 23:02:23 -0500
Glenn,
Do you have an MSR2000 or an MSF5000?
The MSR2000 has plug in modules similar to the Micor but has Mitrek Mobile
Receiver and Exciter with Micor PA.
The MSF5000 has two incarnations:
The Analog MSF5000 has EPROM Codeplugs that must be programmed with an R1800
Suitcase programmer. and was only available in UHF, 800 and 900 MHz bands.
The Digital MSF5000 has EEPROM Codeplugs that can be programmed using radio
service software on a PC and a RIB Box between the PC and the radio. A VHF
model was added at this time.
Doug Eaton
Douglas Technologies, Inc
http://www.dougtech.com
> From: Glenn Little WB4UIV <[email protected]>
> Reply-To: [email protected]
> Date: Sat, 23 Aug 2003 23:54:07 -0400
> To: [email protected], [email protected]
> Subject: [Motorola] MSR5000
>
> I now have a MSR5000 VHF exciter/receiver High split. What do I have to do
> to get it into the ham bands and working properly? I have the ability to
> get it programmed. I think that something will have to be done to the VCO
> modules. Will a MICOR PA work with this?
>
> Thanks
> 73
> Glenn
> WB4UIV