[Motorola] MICOR/MOTRAC/MOCOM relay
Ken Cechura
[email protected]
Sun, 01 Sep 2002 14:09:50 -0500
ok, was just wondering what other people thought of the idea...thanks!
At 12:06 PM 9/1/2002 -0700, you wrote:
>Since the relay works well on VHF and/or UHF (depending on the Moto
>radio it's in) it will work fine on HF. Don't try "hot" switching,
>though. Make sure you're not transmitting when you switch the relay.
>That will fry it instantly. And make sure the radio the relay came
>from is rated at 100 W.
>
>73,
>
>Dick
>
>
>Ken Cechura wrote:
> >
> > Does anyone know the rough frequency ratings on such relays? (MICOR,
> > MOTRAC, MOCOM, etc.) I'd like to use one at HF (100W or less) for
> > switching between two radios in a mobile installation... it's too=
cramped
> > for a regular coax switch, and I think i can fit a small box with the=
relay
> > in it...
> >
> > thanks
> > Ken
> >
> > //////////////////////////////////////////////////////
> > // Kenneth R. Cechura, KC9UMR/=D8 //
> > // [email protected] //
> > // President, W0EEE, 2002 //
> > // University of Missouri-Rolla Amateur Radio Club //
> > //////////////////////////////////////////////////////
> >
> > _______________________________________________
> > Motorola mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/motorola
>_______________________________________________
>Motorola mailing list
>[email protected]
>http://mailman.qth.net/mailman/listinfo/motorola
//////////////////////////////////////////////////////
// Kenneth R. Cechura, KC9UMR/=D8 //
// [email protected] //
// President, W0EEE, 2002 //
// University of Missouri-Rolla Amateur Radio Club //
//////////////////////////////////////////////////////