[Motorola] MICOR/MOTRAC/MOCOM relay

Sun, 01 Sep 2002 12:06:55 -0700

Since the relay works well on VHF and/or UHF (depending on the Moto
radio it's in) it will work fine on HF.  Don't try "hot" switching,
though.  Make sure you're not transmitting when you switch the relay.
That will fry it instantly.  And make sure the radio the relay came 
from is rated at 100 W.

73,

Dick

Ken Cechura wrote:
> 
> Does anyone know the rough frequency ratings on such relays? (MICOR,
> MOTRAC, MOCOM, etc.)  I'd like to use one at HF (100W or less) for
> switching between two radios in a mobile installation...  it's too cramped
> for a regular coax switch, and I think i can fit a small box with the relay
> in it...
> 
> thanks
> Ken
> 
>       //////////////////////////////////////////////////////
>      //        Kenneth R. Cechura, KC9UMR/�              //
>     //             [email protected]                     //
>    //           President, W0EEE, 2002                 //
>   // University of Missouri-Rolla Amateur Radio Club  //
> //////////////////////////////////////////////////////
> 
> _______________________________________________
> Motorola mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/motorola