[Milsurplus] Milsurplus Digest, Vol 241, Issue 14

Wed May 8 09:55:33 EDT 2024

 Well thanks everyone. I never thought about using a plasic spacer. I suppose the plates would hold them in place until you tried to adjust the cap. You would have to be able to see the cap as it turns so the spacers don't fall out.MikeW!ZFB
    On Tuesday, May 7, 2024 at 10:27:23 AM EDT, <milsurplus-request at mailman.qth.net> wrote:   

 Send Milsurplus mailing list submissions to
    milsurplus at mailman.qth.net

To subscribe or unsubscribe via the World Wide Web, visit
    http://mailman.qth.net/mailman/listinfo/milsurplus
or, via email, send a message with subject or body 'help' to
    milsurplus-request at mailman.qth.net

You can reach the person managing the list at
    milsurplus-owner at mailman.qth.net

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Milsurplus digest..."

Today's Topics:

  1. Re: BC-312 Shorted Trimmer Caps (hwhall at aol.com)
  2. Re: BC-312 Shorted Trimmer Caps (arc5 at ix.netcom.com)
  3. Re: BC-312 Shorted Trimmer Caps (hwhall at aol.com)
  4. Hagerstown MVPA Radio Operations (Ray Fantini)

----------------------------------------------------------------------

Message: 1
Date: Mon, 6 May 2024 19:12:40 +0000 (UTC)
From: "hwhall at aol.com" <hwhall at compuserve.com>
To: ARC-5 <arc5 at mailman.qth.net>,     "milsurplus at mailman"
    <milsurplus at mailman.qth.net>,     David Stinson <arc5 at ix.netcom.com>
Subject: Re: [Milsurplus] BC-312 Shorted Trimmer Caps
Message-ID: <1492922975.6249491.1715022760396 at mail.yahoo.com>
Content-Type: text/plain; charset="utf-8"

 Some people recommend restoring the fin spacing with a plastic spacer(s) jammed in between the rotor & stator fins. Others pull the cap & drill & pin the shaft in its collar so that it cannot slip again. I've done the latter for RBM-5 caps but the BC-312 caps are slightly different construction details I think.
WayneWB4OGM
    On Monday, May 6, 2024 at 04:52:28 AM MDT, David Stinson <arc5 at ix.netcom.com> wrote:  

 Someone wrote me about a fix for shorted trimmer caps
in their BC-312.? I cannot find the mail.? Please resend.
Thanks.

-- 
This email has been checked for viruses by Avast antivirus software.
www.avast.com
______________________________________________________________
Milsurplus mailing list
Home: http://mailman.qth.net/mailman/listinfo/milsurplus
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Milsurplus at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/milsurplus/attachments/20240506/bb3d5f6c/attachment-0001.html>

------------------------------

Message: 2
Date: Mon, 6 May 2024 15:32:22 -0500
From: arc5 at ix.netcom.com
To: "=?utf-8?Q?hwhall=40aol.com?=" <hwhall at compuserve.com>, ARC-5
    <arc5 at mailman.qth.net>, milsurplus at mailman
    <milsurplus at mailman.qth.net>, David Stinson <arc5 at ix.netcom.com>
Subject: Re: [Milsurplus] BC-312 Shorted Trimmer Caps
Message-ID: <1928dcf4-7d63-4348-9272-19d952cf8ba6 at localhost>
Content-Type: text/plain; charset="utf-8"

Each to their own of course. I have had a 100% success rate using plastic spacers.

On Mon May 06 14:12:47 CDT 2024 "hwhall at aol.com" wrote:
Some people recommend restoring the fin spacing with a plastic spacer(s) jammed in between the rotor & stator fins...
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/milsurplus/attachments/20240506/ba7fb724/attachment-0001.html>

------------------------------

Message: 3
Date: Mon, 6 May 2024 20:59:07 +0000 (UTC)
From: "hwhall at aol.com" <hwhall at compuserve.com>
To: ARC-5 <arc5 at mailman.qth.net>,     "milsurplus at mailman"
    <milsurplus at mailman.qth.net>,     David Stinson <arc5 at ix.netcom.com>
Subject: Re: [Milsurplus] BC-312 Shorted Trimmer Caps
Message-ID: <297129241.50871.1715029147520 at mail.yahoo.com>
Content-Type: text/plain; charset="utf-8"

 Of course!? Different situations call for different solutions. I'd worry that the spacers would fall out some time when it was least expected. LOL
WayneWB4OGM
    On Monday, May 6, 2024 at 02:32:40 PM MDT, <arc5 at ix.netcom.com> wrote:  

Each to their own of course. I have had a 100% success rate using plastic spacers.

On Mon May 06 14:12:47 CDT 2024 "hwhall at aol.com" wrote:
    Some people recommend restoring the fin spacing with a plastic spacer(s) jammed in between the rotor & stator fins... ______________________________________________________________
Milsurplus mailing list
Home: http://mailman.qth.net/mailman/listinfo/milsurplus
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Milsurplus at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/milsurplus/attachments/20240506/4fae9fbc/attachment-0001.html>

------------------------------

Message: 4
Date: Tue, 7 May 2024 14:26:16 +0000
From: Ray Fantini <RAFANTINI at salisbury.edu>
To: "MMRCG at groups.io" <MMRCG at groups.io>, "mrca at mailman.qth.net"
    <mrca at mailman.qth.net>, "milsurplus at mailman.qth.net"
    <milsurplus at mailman.qth.net>
Subject: [Milsurplus] Hagerstown MVPA Radio Operations
Message-ID:
    <DM8P220MB047297B11F30B7C89BA4B9ECB8E42 at DM8P220MB0472.NAMP220.PROD.OUTLOOK.COM>

Content-Type: text/plain; charset="us-ascii"

Just when you thought it was safe to go on YouTube I have once again posted a video of the last weekends show, well maybe it was not a weekend worth only running Thursday for set up and Friday with everyone packing up and leaving Friday night, but I did stay there and operated all three regularly scheduled Nets on Saturday. The 7087 RTTY military radio net, the MMRCG 7296 USB Net and did check into the M&S Net on 5357, although still having issues trying to copy NCS for that net.
You can see the new video at:

https://www.youtube.com/watch?v=K2fPxFkT_Og

Just as a side note I have noticed that I am concentrating more on doing videos these days as opposed to doing web stuff like I use to do in the past. Think there is more activity using the video platforms in comparison to doing web pages. Least that's how I feel about it right now. Think I may have some benefit of having worked in that field years ago doing that type of work and find it's fun to get back into if it is only in a small way.

Ray F/KA3EKH

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/milsurplus/attachments/20240507/b0f4fdb4/attachment.html>

------------------------------

______________________________________________________________
Milsurplus mailing list
Home: http://mailman.qth.net/mailman/listinfo/milsurplus
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Milsurplus at mailman.qth.net

End of Milsurplus Digest, Vol 241, Issue 14
*******************************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/milsurplus/attachments/20240508/745969c4/attachment-0001.html>