[Milsurplus] ART-13 DY-17 U10?

[Gordon Smith]

Yep. Was typing up a message saying this exact 
thing when your response popped up in the Inbox ;).

73, Gordon KJ6IKT

At 12:32 PM 5/28/2022, Kenneth G. Gordon wrote:
>Others here will have more, and more accurate 
>info, but as I remember it, there was some
>discussion on this very topic some years ago.
>
>The insert can swell over the years, making it almost impossible to remove.
>
>I think either or both Dave Stinson and Robert 
>Downs were involved in that earlier discussion.
>Maybe Mike Hanz also.
>
>Ken W7EKB
>
>On 28 May 2022 at 19:05, W2HX wrote:
>
> >
> >     Hello all,
> >
> >     I am working on wiring up this DY-17 dynamotor for use with the ART-13.
> >     https://w2hx.com/x/ART-13/u-10.jpg
> >
> >     Working to solder up U-10 for the DC 
> input to the dyno, I have removed the back shell/strain
> >     relief to access the solder cups. The 
> cups are pretty deep inside and so I also removed 3 screws
> >     around the perimeter that appear to allow 
> one to remove the middle shell to give more room
> >     to access the solder cups.
> >     https://w2hx.com/x/ART-13/u-10b.jpg (you can see one screw removed)
> >
> >     However, for the life of me, I can´t get 
> the middle shell to separate from the contact block of
> >     the connector. What am I doing wrong? 
> When I look down inside, I see something that could
> >     possible be a snap ring, but there are no 
> places to grip the ring to retract it, and even if I use a
> >     screw driver I can´t get it to move or 
> anything. Maybe it isn´t a snap ring.
> >
> >     Here is the inside:
> >     https://w2hx.com/x/ART-13/U-10a.jpg
> >     https://w2hx.com/x/ART-13/u-10c.jpg
> >
> >     Is there a secret to separating this?
> >     Thanks
> >
> >
> >     73 Eugene W2HX
> >     Subscribe to my Youtube Channel: 
> https://www.youtube.com/c/w2hx-channel/videos
> >
> >
> >
>
>
>______________________________________________________________
>Milsurplus mailing list
>Home: http://mailman.qth.net/mailman/listinfo/milsurplus
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Milsurplus at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html