[Milsurplus] PE-104-A Power Unit Vibrator Help
Carl Reinemann
creinemann at gmail.com
Thu Feb 22 10:44:27 EST 2018
Thanks, Rob,
Where did you order your modules from? Here is the schematic for the
PE-104-A. I am clear on the mechanics of taking the vibrator apart, and
reconfiguring the existing unit, but I am not clear on the actual wiring up
of the new modules to this kind of vibrator as it has 6 pins, whereas the
examples I have seen are seven or four pin units.
Carl
On Wed, Feb 21, 2018 at 10:48 PM, Rob Lee <rob at k7tgu.com> wrote:
> Carl,
>
> Attached is the spec sheet I have. Not sure if it will be any help.
> Ordered a couple of these for use in a TBX 12V power supply, but haven't
> gotten back to the project. Will dig a little deeper to see if I have
> additional documentation.
>
> Rob
>
> ----- Original Message -----
> *From:* Carl Reinemann <creinemann at gmail.com>
> *To:* milsurplus at mailman.qth.net
> *Sent:* Wednesday, February 21, 2018 5:15 PM
> *Subject:* [Milsurplus] PE-104-A Power Unit Vibrator Help
>
> Has anyone converted a Radiart VS-3 Vibrator used in the PE-104-A Power
> Unit of BC-654 Radio set to solid state using the VBN module?
>
> I have been following this thread on the G503.com site
> http://forums.g503.com/viewtopic.php?f=36&t=205860&p=1708669#p1708669
>
> My SCR-284 is working (for now) but I would like to convert that vibrator
> to solid state if any one could help with a wiring diagram.
>
> Carl
>
> ------------------------------
>
> ______________________________________________________________
> Milsurplus mailing list
> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Milsurplus at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/milsurplus/attachments/20180222/65b75c72/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: PE-104-a.pdf
Type: application/pdf
Size: 74597 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/milsurplus/attachments/20180222/65b75c72/attachment-0001.pdf>
More information about the Milsurplus
mailing list