[Milsurplus] What's this connector used with ?

[WA5CAB at cs.com]

Are the connector back shells straight or right angle?

External key between pins 3 and 7 is the standard Cannon SK-C16-21C-nn and 
SK-C16-23C-nn.  If the cable is for ATB, the RCA part numbers stenciled on 
the outside of the back shell would be P-721098-1 for straight and P-721098-2 
for right angle.  And the cable would connect the dynamotor to the 
Operator's Control Box.  But it's pretty short for that, unless it was for a test 
bench.

If neither connector have the RCA number stenciled on them, it could 
connect a TCS transmitter to the dynamotor supply.  But is much too short for the 
MZ.  And as I recall, the AN/MRC-6 was arranged left to right Transmitter, 
Receiver, Dynamotor.  So too short for that.

In a message dated 11/01/2017 15:11:50 PM Central Daylight Time, 
Kargo_cult at msn.com writes: 
> What's this used with? About 1 foot long cable with 2 ARB, ATB type 
> connectors.
> 
>  But keyed between pins 3, 7 
> 
> So not ARB. And ATB has key near pin 3.
> 
>  tnx-   
> 
> Hue 
> 

Robert & Susan Downs - Houston
wa5cab dot com (Web Store)
MVPA 9480
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/milsurplus/attachments/20171101/9d1f7802/attachment.html>